신진정밀
유압모터
모델명
시리즈
Gear Pump
구매 안내
아래는 참고용 정보이므로 세부 조건은 반드시 제조사/판매자에게 문의 바랍니다.
결제 방법
제조사/판매자에게 문의 바랍니다.
납기 정보
제조사/판매자에게 문의 바랍니다.
배송 정보
제조사/판매자에게 문의 바랍니다.
원산지
제조사/판매자에게 문의 바랍니다.
제품 상세 설명
Gear pump is one of the most common types of pumps for hydraulic fluid power applications. They carry pressurized hydraulic fluid to drive actuator such as hydraulic cylinder and hydraulic motor, etc. As the gears rotate they separate on the intake side of the pump, creating suction which is filled by fluid.
The fluid is carried by the gears to the discharge side of the pump, where the meshing of the gears displaces the fluid.
Features
| Series | Features |
| SIP |
SIP pumps are built with aluminum body and hardened steel gears in order for the excellent performance. A wide variety of options are available to meet specific application requirements worldwide. |
| SEP |
SEP pumps are built with cast iron body and hardened steel gears in order for the excellent high temperature characteristics. They are designed to provide reliable, long life service under rugged conditions with the excellent hydraulic performance, flexibility, high efficiency, low and high speed operation, low noise performance. |
| SMP20 |
SMP20 pumps are consist of a pair of gears supported in bearing bushings and extruded body in high resistance aluminum alloy, aluminum die casting front cover and rear cover. SMP20 pumps are suitable for multiple setup, whereby the drive shaft for the 1st pump is extended to a second and even a 3rd pump. |
Application
| Series | Application |
| SIP |
SIP Pumps are designed to be suitable for forklift trucks, skid steer loaders, wheel loaders, etc. Priority valve or relief valve options are available. |
| SEP |
SEP Pumps are designed to be suitable for use in a wide variety of applications, including industrial, construction and agricultural machinery. |
| SMP20 |
SMP20 Pumps are designed to be suitable for use in a wide variety of industrial and agricultural applications such as forklift truck, Excavator, tractor, etc. |
Specification
| Series | Displacements | Speed | Pressure |
| SIP | from 11.9 ㎤/rev to 32 ㎤/rev | from 600 rpm to 2700 rpm | Max. continuous 250 bar Max. peak 280 bar |
| SEP | from 11.9 ㎤/rev to 32 ㎤/rev | from 600 rpm to 2700 rpm | Max. continuous 250 bar Max. peak 280 bar |
| SMP20 | from 4.8 ㎤/rev to 31 ㎤/rev | from 600 rpm to 3000 rpm | Max. continuous 250 bar Max. peak 280 bar |