Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍSpeed Control
ㆍTacho-Generator Type
■ PERFORMANCE DATA (DUTY : CONTINUOUS)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Starting | Condenser | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
| IHT9PG90-10 | 90 | 1ø100 | 50 | 90~1400 | 4.14 | 1.55 | 1.80 | 4.20 | 250 | 25.0 |
| 60 | 90~1700 | 4.14 | 1.55 | 1.80 | 5.40 | |||||
| IHT9PG90-11 | 1ø110 | 60 | 90~1700 | 4.87 | 1.83 | 1.80 | 6.50 | 250 | 25.0 | |
| IHT9PG90-20 | 90 | 1ø200 | 50 | 90~1400 | 4.14 | 1.55 | 1.20 | 4.50 | 450 | 7.0 |
| 60 | 90~1700 | 4.14 | 1.55 | 1.20 | 5.50 | |||||
| IHT9PG90-22 | 1ø220 | 60 | 90~1700 | 4.87 | 1.83 | 1.20 | 6.80 | 450 | 7.0 | |
| IHT9PG90-1U | 90 | 1ø115 | 60 | 90~1700 | 4.87 | 1.83 | 1.80 | 6.00 | 250 | 20.0 |
| IHT9PG90-2C | 90 | 1ø220 | 50 | 90~1400 | 4.87 | 1.83 | 0.81 | 5.50 | 450 | 5.0 |
| 100 | 1ø240 | 50 | 90~1700 | 5.68 | 2.03 | 0.81 | 6.50 | |||
■ PERFORMANCE DATA (DUTY : 30 Min.)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Starting | Condenser | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
| RHT9PG90-10 | 90 | 1ø100 | 50 | 90~1400 | 6.21 | 1.55 | 2.30 | 5.00 | 250 | 30.0 |
| 60 | 90~1700 | 6.21 | 1.55 | 2.30 | 5.00 | |||||
| RHT9PG90-11 | 1ø110 | 60 | 90~1700 | 7.30 | 1.83 | 2.30 | 6.00 | 250 | 30.0 | |
| RHT9PG90-20 | 90 | 1ø200 | 50 | 90~1400 | 6.21 | 1.55 | 1.30 | 6.00 | 450 | 7.0 |
| 60 | 90~1700 | 6.21 | 1.55 | 1.30 | 6.00 | |||||
| RHT9PG90-22 | 1ø220 | 60 | 90~1700 | 7.30 | 1.83 | 1.30 | 7.00 | 450 | 7.0 | |
| RHT9PG90-1U | 90 | 1ø115 | 60 | 90~1700 | 7.30 | 1.83 | 2.00 | 5.50 | 250 | 25.0 |
| RHT9PG90-2C | 90 | 1ø220 | 50 | 90~1400 | 7.30 | 1.83 | 0.97 | 5.70 | 450 | 6.0 |
| 100 | 1ø240 | 50 | 90~1700 | 8.11 | 2.03 | 0.97 | 7.00 | |||
- For motor with straight shaft, please write S in place of PG in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation.
- It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40℃
- when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.
■ MOTOR(STRAIGHT SHAFT) I(R)HT9S90 WT 3.7kg
■ GEARED MOTOR I(R)H9TPG90 + 9H□ GBB WT 3.7+1.5kg
■ BOLT SIZE
| TYPE | BOLT SIZE |
|---|---|
| 9H□ GB | M6×90 |
■ KEY SPEC
■ GEARED HEAD 9H□ GBF WT 1.5kg
■ BOLT SIZE
| TYPE | BOLT SIZE |
|---|---|
| 9H□ GBF | M6×25 |
■ KEY SPEC
■ DECIMAL GEAR HEAD 9H10XG WT 0.6kg
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.
