Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍSpeed Control
ㆍTacho-Generator Type
■ PERFORMANCE DATA (DUTY : CONTINUOUS)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Starting | Condenser | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
| IHT6PF6-10 | 6 | 1ø100 | 50 | 90~1400 | 0.41 | 0.10 | 0.24 | 0.40 | 250 | 2.5 |
| 60 | 90~1700 | 0.41 | 0.10 | 0.24 | 0.40 | |||||
| IHT6PF6-11 | 1ø110 | 60 | 90~1700 | 0.49 | 0.12 | 0.24 | 0.50 | 250 | 2.5 | |
| IHT6PF6-20 | 6 | 1ø200 | 50 | 90~1400 | 0.41 | 0.10 | 0.12 | 0.40 | 450 | 0.7 |
| 60 | 90~1700 | 0.41 | 0.10 | 0.12 | 0.40 | |||||
| IHT6PF6-22 | 1ø220 | 60 | 90~1700 | 0.49 | 0.12 | 0.12 | 0.50 | 450 | 0.7 | |
| IHT6PF6-1U | 6 | 1ø115 | 60 | 90~1700 | 0.49 | 0.12 | 0.24 | 0.50 | 250 | 2.5 |
| IHT6PF6-2C | 6 | 1ø220 | 50 | 90~1400 | 0.49 | 0.12 | 0.12 | 0.50 | 450 | 0.6 |
| 7 | 1ø240 | 50 | 90~1400 | 0.57 | 0.14 | 0.12 | 0.55 | |||
■ PERFORMANCE DATA (DUTY : 30 Min.)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Starting | Condenser | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
| RHT6PF6-10 | 6 | 1ø100 | 50 | 90~1400 | 0.41 | 0.10 | 0.30 | 0.45 | 250 | 3.0 |
| 60 | 90~1700 | 0.41 | 0.10 | 0.30 | 0.45 | |||||
| RHT6PF6-11 | 1ø110 | 60 | 90~1700 | 0.49 | 0.12 | 0.30 | 0.55 | 250 | 3.0 | |
| RHT6PF6-20 | 6 | 1ø200 | 50 | 90~1400 | 0.41 | 0.10 | 0.15 | 0.45 | 450 | 0.8 |
| 60 | 90~1700 | 0.41 | 0.10 | 0.15 | 0.45 | |||||
| RHT6PF6-22 | 1ø220 | 60 | 90~1700 | 0.49 | 0.12 | 0.15 | 0.55 | 450 | 0.8 | |
| RHT6PF6-1U | 6 | 1ø115 | 60 | 90~1700 | 0.49 | 0.12 | 0.23 | 0.60 | 250 | 2.5 |
| RHT6PF6-2C | 6 | 1ø220 | 50 | 90~1400 | 0.49 | 0.12 | 0.14 | 0.60 | 450 | 0.8 |
| 7 | 1ø240 | 50 | 90~1400 | 0.57 | 0.14 | 0.14 | 0.70 | |||
- For motor with straight shaft, please write S in place of PF in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation.
- It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40℃
- when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.
■ MOTOR(STRAIGHT SHAFT) I(R)HT6S6 WT 1.0kg
■ GEARED MOTOR I(R)HT6PF6 + 6H□ FM(6H□ FB)WT 1.0+0.3/0.4kg
■ BOLT SIZE
| No | L(mm) | GEAR RATIO | BOLT SIZE |
|---|---|---|---|
| 01 | 30 | 1/3 ~ 1/18 | M4×60 |
| 02 | 40 | 1/20 ~ 1/200 | M4×70 |
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.
