The world first pluggable EDFA, XOA is a full-functioning EDFA module with control circuitry packaged inside. It is totally compatible with conventional XFP optical transceiver in respect of size and pin-map.
Due to the small size and easy installation, the XOA is designed for a single wavelength applications in fiber optic communications system in core networks, access networks, or CATV networks.

- Conventional XFP compatible size and pin map
- Cost efficiency with pluggable type
- Space efficiency using remaining slot (No extra equipment required)
- EDFA module including micro process control circuit
- Uncooled 980 nm pump laser module
- Extremely lower the heat generation
- High saturation output power up to 17dBm
- Selectable Output Power
- APC (Automatic Power Control; Default) or AGC(Automatic Gain Control; Optional) with FLS (Forced Laser Shutdown)
- Control & monitoring by I2C
- LVTTL Alarm
- Single + 3.3 V power supply

- 10G/100G or higher speed Channel Amplifier
- Reach Extension for L2/L3 Ethernet Switch
- High Speed Data Center Network
- RF over Fiber Network
- Power Boosting and Pre-emphasis Amplifier for DWDM Metro System
- ROADM System

The world’s smallest pluggable EDFA, XOA is a full-functioning EDFA module with control circuitry packaged inside. It is totally compatible with conventional XFP optical transceiver in respect of size and pin-map. Due to the small size and easy installation,
the XOA is designed for a single wavelength applications in fiber optic communications system in core networks, access networks, or CATV networks.

- Ultra compact size (59 x 16 x 7.5 mm )
- Full functional EDFA module including micro process control circuit
- Including VOA, TOF and/or VOA+TOF
- Automatic wavelength searching and locking function (Optional)
- Including Input Monitor and Input Isolator (Optional)
- Extremely low power consumption over wide operating temperature range
- Wide operating wavelength range
- Wide settable output power range
- APC (Automatic Power Control) with FLS (Forced Laser Shutdown)
- Control & monitoring by I2C
- LVTTL Alarm
- Single + 3.3 V power supply
- Additional 44V power supply (Optional for TOF)

- Optimized for integration into 100 Gbps coherent CFP & CPF2 modules
- Loss Compensation for active optical modules
- Signal loss compensation in switch matrix
- Power equalization and Pre-emphasis Amplifier for DWDM Metro System
- 2.5G/10G/40G/100G Channel Amplifier
- SONET/SDH system
- OADM access networks
- CATV System

LiComm’s unique TOA+ EDFA is small enough to fit into CFP2 units. This world’s smallest and unique EDFA for Analog or Digital Coherent Optics ACO/ DCO,
takes up little space as it fits into a CFP2 housing efficiently. It’s a fully functioning optical amplifier engine with and without GFF.

- Fit in CFP2 Housing
- Ultra compact size ( 39.3 x 24.8 x 3.8 mm )
- Full EDFA Gain Block include GFF  (Optional)
- Full C-band operating wavelength range
- Extremely low power consumption over wide operating temperature range

- CFP2-ACO or CFP2-DCO of Coherent Transceiver

LiComm’s unique TOA EDFA is small enough to fit into CFP2 units. This world’s smallest and unique EDFA for Analog or Digital Coherent Optics ACO/ DCO,
takes up little space as it fits into a CFP2 housing efficiently. It’s a fully functioning optical amplifier engine with VOA, TOF or both inside, or can include GFF.

- Fit in CFP2 Housing
- Ultra compact size ( 39.3 x 24.8 x 6.2 mm )
- Full EDFA Gain Block include VOA, TOF ,VOA + TOF, GFF  (Optional)
- Full C-band operating wavelength range
- Extremely low power consumption over wide operating temperature range

- CFP2-ACO or CFP2-DCO of Coherent Transceiver

The world’s smallest EDFA, pOA is a full-functioning EDFA module with the control circuitry packaged inside. It is designed for a single wavelength applications in fiber optic communications system in core networks,
access networks, or CATV networks. The pOA, OFA-TCP series provides very stable output power up to in C-band over the wide operating temperature range.

- Ultra compact size (46x19x10 mm)
- EDFA module including micro process control circuit
- Uncooled 980 nm pump laser module
- Extremely low power consumption over wide operating temperature range
- High output power up to 17 dBm
- APC (Automatic Power Control) with FLS (Forced Laser Shutdown)
- Control & monitoring by I2C
- LVTTL Alarm
- Single + 3.3 V power supply

- Loss Compensation for active optical modules
- Optimized for integration into 100 Gbps coherent CFP & CPF2 modules
- Signal loss compensation in switch matrix
- Power equalization and Pre-emphasis Amplifier for DWDM Metro System
- 2.5G/10G/40G/100G Channel Amplifier
- SONET/SDH system
- OADM access networks
- CATV System

The world smallest EDFA, pOA+ is a full-functioning EDFA module with the control circuit packaged inside. It is designed for a single wavelength applications in full extended c-band fiber optic communications system in core networks,
access networks, or CATV networks. The pOA+, OFA-TCQ series provides very stable output power up to in C-band over the wide operating temperature range.

- Ultra compact size (59 x 16 x 7.5 mm ) 
- Full functional EDFA module including micro process control circuit
- Including VOA, TOF, VOA+TOF, GFF (Optional)
- Automatic wavelength searching and locking function (Optional)
- Including Input Monitor and Input Isolator (Optional)
- Extremely low power consumption over wide operating temperature range
- Wide operating wavelength range
- Wide settable output power range
- APC (Automatic Power Control) with FLS (Forced Laser Shutdown)
- Control & monitoring by I2C
- LVTTL Alarm
- Single + 3.3 V power supply

- Optimized for integration into 100 Gbps coherent  CFP & CPF2 modules
- Loss Compensation for active optical modules
- Power boosting and Pre-emphasis Amplifier for DWDM Metro System
- 2.5G/10G/40G/100G Channel Amplifier
- ROADM System
- CATV System

The world’s smallest EDFAs, TiOTM series are two full-functioning EDFAs in a package. The electric control board permits to control and monitor separately two EDFAs.
It is designed for c-band applications for channel cards in fiber optic communications system of core networks, access networks, or CATV networks.

- Two EDFAs are independently controlled  and monitored.
- EDFA module including micro process control circuit
- Uncooled 980 nm pump laser modules
- Extremely low power consumption over wide operating temperature range
- Output  power up to 17dBm  for each
- AGC(automatic  Gain Control) or APC (Automatic Power Control) 
- Control & monitoring by  RS232
- LVTTL Alarm
- Single + 3.3 V power supply

- Power equalization and Pre-emphasis Amplifier for DWDM Metro System
- 2.5G/10G/40G/100G Channel Amplifier
- Signal loss compensation in switch matrix
- Loss Compensation for active optical modules
- Optimized for integration into 100 Gbps  coherent modules
- SONET/SDH system
- OADM access networks
- CATV System

The LiComm uncooled EDFA OFA-TCU series is a full-functioning EDFA module with control circuitry packaged inside. It is designed for a single
Wavelength applications in fiber optic communications system in core
networks, access networks, or CATV networks.

- Ultra compact size (50 x 30 x 8mm) 
- Uncooled 980nm pump laser module
- Extremely low power consumption over wide operating temperature range
- EDFA module including micro process control circuit
- High output power up to 17dBm
- Multiple package sizes
- Low noise figure
- APC (Automatic Power Control) with FLS (Forced Laser Shutdown)
- Control & monitoring by RS232
- LVTTL Alarm
- Single + 3.3V power supply

- 2.5G/10G/40G Channel Amplifier
- Narrow band amplification in C-band
- Power equalization and Pre-emphasis Amplifier for DWDM Metro System
- Signal loss compensation in switch matrix
- SONET/SDH system
- OADM access networks
- CATV System