MAC-PUMP
▶ Magnetic Chemical Pumps
No Shaft Seal (Seal-less)
The MAC-PUMP eliminates the conventional shaft seal found in all centrifugal pumps. This means that impeller magnet assembly separated with the rear casing syn-chronises the driving magnet (permanent magnet) mounted on the electric motor shaft.
High Corrosive Resistance
The MAC-PUMP, using fluoro-plastic component made by injection molding process, is designed to handle a wide range of strong acids, caustic solvents.
Serviceability
Consisting of only four sub-assemblies that contact solu-tion, the MAC-PUMP can be easily and completely disas-sembled and reassembled.
Pump Protector (MAC-METER)
The MAC-METER protects the pump from dry operation
Solid Cast Iron Outer Shell
Specification
Model | M250 | M400 | M500 | M503F /M503N | M650 | |
Suction port(mm) | 25 | 40 | 50 | 50 | 65 | |
Diacharge port(mm) | 25 | 40 | 40 | 40 | 50 | |
Standard Head-Capacity | 50Hz | 10m to 60l/min | 10m to 170l/min | 15m to 230l/min | 20m to 200l/min | 15m to 320l/min |
60Hz | 10m to 50l/min | 10m to 160l/min | 15m to 190l/min | 20m to 200l/min | 15m to 280l/min | |
Motor | POLes | 2 | 2 | 2 | 2 | 2 |
Kilo-Watts | 0.4 | 0.75 | 1.5 | 2.2 | 2.2 | |
Phase Volts | *3 200 220 400 440 | |||||
Weight Kg | 35 | 45 | 60 | 62 | 75 | |
Model | M655F | M800 | M801 | M1000 | |
Suction port(mm) | 65 | 80 | 80 | 100 | |
Diacharge port(mm) | 50 | 50 | 50 | 80 | |
Standard Head-Capacity | 50Hz | 25m to 200l/min | 25m to 300l/min | 25m to 340l/min | 25m to 600l/min |
60Hz | 30m to 200l/min | 25m to 260l/min | 25m to 400l/min | 25m to 600l/min | |
Motor | POLes | 2 | 2 | 2 | 2 |
Kilo-Watts | 3.7 | 3.7 | 5.5 | 7.5/5.5 | |
Phase Volts | *3 200 220 400 440 | ||||
Weight Kg | 96 | 105 | 150 | 180 | |
Connection flanged: JIS 10K RF, DIN 10K RF ANSI Class 150RF
Standard head-capacity: Based on pumping water at room temperature.
Standard motor: Pump with totally enclosed fan cooled outdoor motor.
