Search

FIMOR SAS

FIMOR SAS

FIMOR SAS

FIMOR SAS

+33-243-406-600
홈기업찾기FIMOR SAS
1/1
FIMOR SAS

FIMOR SAS

Diamond KUTRONIC Sharpener

모델명

시리즈

Sharpeners

구매 안내

아래는 참고용 정보이므로 세부 조건은 반드시 제조사/판매자에게 문의 바랍니다.

결제 방법

제조사/판매자에게 문의 바랍니다.

납기 정보

제조사/판매자에게 문의 바랍니다.

배송 정보

제조사/판매자에게 문의 바랍니다.

원산지

제조사/판매자에게 문의 바랍니다.

+33-243-406-600

제품 상세 설명

Diamond KUTRONIC is a high quality, fully-automated sharpener for longer squeegees; with four models to sharpen up to 60” (153cm), 76” (193cm), 96” (244cm) and 120” (305cm).  Uniform sharpening speed, consistency of grinding pressure and material removal, all assure superior quality control.

Machine specifications

Model DKTR-260, DKTR-276, DKTR-296, DKTR-2120
Sharpening Length 60″ (153cm) – 76″ (193cm) – 96″ (244cm) – 120″ (305cm)
Sharpening Profile Two straight/square-edge wheels supplied as standard
Diamond Wheel Grit Square/Straight #100 and #360 grit supplied as standard (#60 and #600 grit available by special order)
Material removal Recommended rate 0.002-0.005″ (0.05-0.10mm) – Grit dependent
Blade Height Tolerance +/- 0.006″ (0.15mm) measured from end to end
Edge Straightness Adjustable from -0.050″ to +0.050″ camber (-1.22mm to +1.22mm camber) at full length (Note: For best performance all diamond KUTRONIC are factory set at +0.050″camber)
Power Requirement 115-120v AC15Amp (230v AC optional)
Physical Size 60″ (153cm) Model:
Length: 86″ (218 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

76″ (193cm) Model:
Length: 102″ (259 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

96″ (244cm) Model:
Length: 117″ (297 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

120″ (305cm) Model:
Length: 141″ (358 cm)
Height: 62″ (157 cm)
Width: 27″ (69 cm)

 

Advantages

Sharpens a wide range of squeegee materials (some materials sharpen better than others*), including single and multiple durometer.
Special squeegee-clamping mechanism accommodates all holder profiles without bending or flexing the blade during sharpening.
Unique vertical lift assures consistent parallelism between sharpening wheel and blade.
Includes two 6’’ indestructible diamond sharpening wheels with a 5-year warranty against diamond wear in normal use.
Fully enclosed sharpening wheel for maximum safety during use.
Prepared for the installation of a vacuum system to clean residue from the sharpened squeegee (vacuum not included).

자료 다운로드

Catalog-Fimor-Diamond KUTRONIC Sharpener

문의하기