Manufacturer of Sun Fuel, Disposable Butane Gas, Lacquer Spray, Industrial Aerosol Products
Packing unit : Aerosol 420ใ/Can, 20cans/Box
Product information
YECOA YL-205 is an excellent rubber releasing agent .
ใHight molecular-weight compound with the solvent not containing chlorine compounds as the main composition.
ใSuperior for all of the natural rubber, synthetic rubber, other thermosetting resins irrespective of rubber types
ใReleasing for several times possible (To obtain the maximum frequency of releasing, the releasing agent sprinkled onto the mold should be cured at 93โ or the agent should be cured at a forming temperature(the higher, the better))
ใSuperior heat resistance.
Usage
ใRubber forming: Rubbers such as NR, NBR, SBR, etc.
ใEpoxy, polyester, phenolic resin, thermosetting resin, old releasing agent.
How to use
ใAlways wear safety equipment before work.
ใDegrease oil content, dirt, and dust on the metal surface by using YL-107.
ใShake the container before using it.
ใApply it 20∼30cm away from target object.
ใApply it again depending on desired thickness.
ใSolvent resistance, cohesion, and heat resistance increase.
ใPlease confirms the application.
Precautions
โป Please observe the following points when storing and using the product and discard
ใEven though it is low-flammable, keep away from fire to spray it.
ใProvide good ventilation for long-time use.
ใKeep it in a well-ventilated place below 40โ.
ใDo not use it toward fire.
ใDo not use near heater or stove.
ใDo not use in the room using fire.
ใDo not keep it in a place above 40โ.
ใProvide ventilation to use it in the closed room.
ใDo not throw it away into fire.
ใPunch the can to throw it away.
ใDo not keep it in a closed place.
ใSpraying may not work well below 5โ.