Chat with us, powered by LiveChat Float Type Power Drain Trap (Pneumatic) | Woori TECH - Komachine
Product Name Float Type Power Drain Trap (Pneumatic)
Model WRDT-500
Series Power Drain Trap (Pneumatic)
Catalog Power Drain Trap.pdf
Product Description

Advantages

1. High reliable working

2. Manual discharge valve is sticked.  

3. No loss of compressed air    

4. Optimum determination of float location    

5. Easy maintenance      

6. Visible working status     

7. No need electric connection

8. Easy installation

 

 

Applications

1. AIR COMPRESSOR

2. INTER COOLER

3. AFTER COOLER

4. SEPARATOR

5. ECEIVER TANK

6. AIR FILTER

7. REFRIGERATED AIR DRYER

8. OTHER PIPES WHERE CONDENSED WATER FORMED

 

 

Operating Principle

 

 

 

 

Installation 1

1. Install when the condensed water outlet is higher than drain trap.

1) Install Shut off Valve & Strainer first and install Trap lower area.

2) Use the valve sticked strainer which is easy to clean

3) Connect Outlet

4) Open the manual valve and check if the compressed air and condensed water is flowed.

 

 

 

 

 

 

Installation 2

2. Install when the condensed water outlet is lower than drain trap.

1) Install Shut off Valve & Strainer first and install Trap by using Inlet.

2) Connect Balance Line in the upper portion.If the Balance Line connection is difficult,install the valve and open slightly.

3) Connect Outlet

4) Open the manual valve and check if the compressed air and condensed water is flowed.

 

 

 

 

 

 

WRDT-500 Drawing / Spec.

SPECIFICATIONS

Woring Temperature

2 ~ 70

Woring Pressure

0.1 ~ 9.9

kgf/㎠

Maximum Capacity

120

Liter/hr

AIR COMP.

100

HP

INLET

PT1/2" Up & Down

2 point

OUTLET

PT 3/8"

OPTION

Y-strainer with cleaning valve

Products of Woori TECH
Dew point Meter (Shawmeters, UK)