Advantages

- Exclusive reciprocating compressor
- The installable small size in the bottom of R-tank.
- Working by compressor loading and unloading
- Free installation regardless of direction.
- Manual drain discharge is available
- The optional valve sticked strainer

 

 

 

Specifications

SPECIFICATION
MODEL	In/Out port	OPTION	Using Pressure	Using Temp.	Compressor
WRCT-08	1/4"	-	0 ~ 9.9 kgf/㎠	2 ~ 75 ℃	3 ~ 20HP
WRCT-08-I	1/4", 1/2"	I-STRAINER
WRCT-08-Y	1/2"	Y-STRAINER

 

 

 

 

 

 

 

 

 

Auto Drain Working Status

The 1st press.(R/Tank)	The 2nd press.(Head)	Compressor Working Status	Drain Status
0.2~2.0 kgf/㎠	0.2~2.0 kgf/㎠	Same pressure (In the case of compressor working)	OPEN
Over 2.0 kgf/㎠	Over 2.0 kgf/㎠	Same pressure (After pressure rising)	CLOSE
Over 5.0 kgf/㎠	2.0~4.0 kgf/㎠	In the case of Compressor running- Loading/Unloading	OPEN

 

 

 

 

 

* The 1st press. : Inside pressure of air receiver tank (Inlet pressure of trap)                    
* The 2nd press. : Pressure between compressor head & check valve (Balance line pressure of trap)  

 

 

 

Dimension

 

 

 

Installation

1. Stop air compressor and install.

2. The 1st piping of trap: Connect to the drain of receiver tank

3. The 2nd piping of trap: Connect to the using air vent line (Solenoid valve or pressure switch)

4. Check how it works after installation (Refer to the previous page Auto drain Working Status )