Search

매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

051-621-9648
기업찾기매그스위치테크놀로지코리아
1/1
매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

Turnover Clamp

모델명

시리즈

Clamps


구매 안내

아래는 참고용 정보이므로 세부 조건은 반드시 제조사/판매자에게 문의 바랍니다.

결제 방법

제조사/판매자에게 문의 바랍니다.

납기 정보

제조사/판매자에게 문의 바랍니다.

배송 정보

제조사/판매자에게 문의 바랍니다.

원산지

제조사/판매자에게 문의 바랍니다.


051-621-9648

제품 상세 설명

NVC-LPS

WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
30-202556218840471253555519437312.5
50-404557524062521504365822509020.4
0-505557525462621504525822509022.9
80-4045580265725816049870285810231.5
0-5055584278726316050870285810232.5
0-6065586292726516252070285810233.5
30-7075588312726817255670306010439.0
40-8090590330727418056870306010441.1
100-5055584293707018054070305910742.0
5-6065548302707018554770305910743.3
50-90100595355747819061675326811653.3
50-1001105100374758520262875326811657.7
125-7075592316736716755070306812046.5
8-4045595295706217055875367513149.7
8-60655100322726817856875367513156.0


No.ASS’Y NAMENo.PART NAMENo.ASS’Y NAMENo.PART NAME
1BODY--6PAD ASS’Y6-1PAD
2SHACKLE--6-2BOLT & NUT
3SHACKLE PIN--7LEVER ASS’Y7-1SAFETY LEVER
4CAM ASS’Y4-1CAM7-2STOPPER ASS’Y
4-2LINK7-3SPRING PIN
4-3SPRING PIN7-4ROLLER
4-4RIVET PIN7-5SPRING PIN
5CAM BOLT ASS’Y5-1BOLT & NUT8LOCK SPRING--
5-2SPRING PIN


Features

- A special lightweight clamp with a safety factor of 3. The NVC-LPS is convenient and fast to turn over an enlarged plate 
   by butt welding steel plates at shipbuilding plants of shipyards.
- The NVC-LPS has the large pad instead of a jaw in order to minimize the sway of a work piece when turning over it.
- Due to the safety lever, the NVC-LPS is convenient to work with and easy to separate the clamp after lifting thick steel plates.
- After releasing the lever, the link stops functioning even if the shackle is lifted. Therefore, it is easy to do the biting and releasing work.


How to use

- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.


Warnings

- Do not exceed the rated capacity specified on the clamp because the NVC-LPS is lightweight with a safety factor of 3.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- For the turnover clamp, it is safe to use sling chains rather than wire ropes. Use chains of the same length. Ensure that the angle of
  the chain is vertical to the ground.
- When lifting work pieces, a signal man must be outside the rotation radius of a work piece to send a signal to a crane operator


문의하기