Gear Coupling by NARA CORP - Komachine Supplier Profile and Product List

NARA CORP

Home Manufacturers NARA CORP

1/1

NARA CORP

Gear Coupling

Model

Series

Flexible Coupling

Transaction Process

Please contact Komachine.

Payment

Please contact Komachine.

Delivery

Please contact Komachine.

Shipment

Please contact Komachine.

Origin

Please contact Komachine.

Description

Description

Gear Coupling

The gear coupling is consisted of the internal gears in its sleeves and the external gears with crowned teeth on its hubs. Since these gears are so designed as to employ an involute tooth profile and to have a special form, equal sped and smooth power transmission can be obtained even when a little tilting is occurred between sleeves and hubs.

[Features]

- With capacity of heavy handling loads, this coupling is smaller and lighter than other couplings and used for high speed.

- This coupling can protect the machine against offset and angular displacement, and so transmit heavy power.

- Larger size and special type can be manufactured by customer requirements.

Coupling For Train

The coupling for train has rugged structure with special material and heat treatment and the angular displacement of the coupling could be max, 6'. This coupling has been performed on the actual train running test and qualified.

[Features]

- There are two types of the couplings for train (Spring type and non spring type)

- With adopting the special sealing, there is no oil leakage during high offset or high angular displacement operation.

- Long life could be available with low noise and vibration even high speed.

SSM/CCM

※ G1 : the sleeve position for shaft alignment
※ G2 : the sleeve position for checking the gear wear

SSM

Size (out diameter A)	Permissible torque (N·m)	Max. rotating speed (rpm)	Dimension (mm)									Mass (kg)	J (kg·㎡)	Grease (g)
Size (out diameter A)	Permissible torque (N·m)	Max. rotating speed (rpm)	Shaft diameter D (max/min)	E	ℓ₁	C	B	F	K	G₁	G₂	Mass (kg)	J (kg·㎡)	Grease (g)
100	421	5,000	32 / 17	88	40	8	46	67	34	-1	15	2.9	0.003	40
112	788	5,000	40 / 17	98	45	8	58	79	40	-4	19	4.1	0.005	50
125	1,400	5,000	50 / 22	108	50	8	70	92	43	-4	20	5.8	0.008	70
140	2,010	5,000	56 / 22	134	63	8	80	107	47	3	15	8.8	0.015	100
160	3,080	5,000	65 / 22	170	80	10	95	120	52	12	7	14	0.03	130
180	4,730	5,000	75 / 32	190	90	10	105	134	56	15	5	19	0.05	160
200	6,750	4,700	85 / 32	210	100	10	120	149	61	18	5	26	0.08	220
224	9,810	4,200	100 / 42	236	112	12	145	174	65	25	1	40	0.16	320
250	14,400	3,800	115 / 42	262	125	12	165	200	74	28	1	56	0.29	480
280	22,900	3,400	135 / 42	294	140	14	190	224	82	28	1	79	0.50	620
315	36,100	3,000	160 / 100	334	160	14	225	260	98	23	11	122	1.01	1,000
355	54,400	2,600	180 / 125	376	180	16	250	288	108	24	11	171	1.77	1,200
400	76,400	2,300	200 / 140	416	200	16	285	329	114	39	0	245	3.25	1,800

* The mass and J are the value before hole manufacturing.(GD2=4J)

CCM

Size (out diameter A)	Permissible torque (KN·m)	Max. rotating speed (rpm)	Dimension (mm)									Mass (kg)	J (kg·㎡)	Grease (kg)
Size (out diameter A)	Permissible torque (KN·m)	Max. rotating speed (rpm)	Shaft diameter D (max/min)	E	ℓ₁	C	B	F	K	G₁	G₂	Mass (kg)	J (kg·㎡)	Grease (kg)
450	93	2,100	205 / 140	418	200	18	290	372	151	-3	6	300	5.1	2.3
500	127	1,900	236 / 170	470	224	22	335	424	168	-2	7	429	9.1	3.5
560	204	1,700	275 / 190	522	250	22	385	475	187	-8	13	619	16.9	4.5
630	309	1,500	325 / 224	588	280	28	455	544	213	-18	25	921	32.4	7.0
710	450	1,300	360 / 250	658	315	28	510	622	242	-23	30	1,312	59.9	10.5
800	643	1,150	405 / 280	738	355	28	570	690	267	-24	32	1,830	102	13.7
900	915	1,050	475 / 315	832	400	32	670	792	295	-23	20	2,753	200	18
1,000	1,254	950	510 / 355	932	450	32	720	858	322	-14	24	3,700	322	23
1,120	1,764	850	600 / 400	1,040	500	40	840	990	360	-5	15	5,402	622	34
1,250	2,450	750	710 / 500	1,160	560	40	960	1,126	399	0	10	7,730	1,129	48

* The mass and J are the value before hole manufacturing.(GD2=4J)

SEM/CEM

※ G1 : the sleeve position for shaft alignment
※ G2 : the sleeve position for checking the gear wear

SEM

Size (out diameter A)	Permissible torque(N·m)	Max. rotating speed(rpm)	Dimension(mm)										Mass (kg)	J (kg·㎡)	Grease (g)
Size (out diameter A)	Permissible torque(N·m)	Max. rotating speed(rpm)	Shaft diameter D (max /min)	Shaft diameter D_E (max /min)	E	ℓ₁	C	K	J	H	G₁	G₂	Mass (kg)	J (kg·㎡)	Grease (g)
100	421	5,000	32 / 17	40 / 17	88	40	8	34	44	55	-1	15	3.0	0.003	30
112	788	5,000	40 / 17	50 / 17	98	45	8	40	49	70	-4	19	4.3	0.005	40
125	1,400	5,000	50 / 22	56 / 22	108	50	8	43	54	80	-4	20	6.0	0.008	60
140	2,010	5,000	56 / 22	63 / 22	134	63	8	47	67	90	3	15	9.0	0.015	80
160	3,080	5,000	65 / 22	75 / 22	170	80	10	52	85	105	12	7	14	0.03	110
180	4,730	5,000	75 / 32	80 / 32	190	90	10	56	95	115	15	5	19	0.05	130
200	6,750	4,700	85 / 32	95 / 32	210	100	10	61	105	135	18	5	27	0.08	170
224	9,810	4,200	100 / 42	105 / 42	236	112	12	65	118	150	25	1	40	0.16	270
250	14,400	3,800	115 / 42	125 / 42	262	125	12	74	131	180	28	1	58	0.29	370
280	22,900	3,400	135 / 42	150 / 42	294	140	14	82	147	210	28	1	84	0.54	510
315	36,100	3,000	160 / 100	180 / 100	334	160	14	98	167	250	23	11	130	1.10	810
355	54,400	2,600	180 / 125	200 / 125	376	180	16	108	188	275	24	11	180	1.89	1,000
400	76,400	2,300	200 / 140	236 / 140	416	200	16	114	208	325	39	0	260	3.60	1,440

* The mass and J are the value before hole manufacturing.(GD2=4J) * "B" and "F" same as those of SSM

CEM

Size (out diameter A)	Permissible torque (N·m)	Max. rotating speed (rpm)	Dimension(mm)										Mass (kg)	J (kg·㎡)	Grease (kg)
Size (out diameter A)	Permissible torque (N·m)	Max. rotating speed (rpm)	Shaft diameter D (max /min)	Shaft diameter D_E (max/min)	E	ℓ₁	C	K	J	H	G₁	G₂	Mass (kg)	J (kg·㎡)	Grease (kg)
450	93	2,100	205 / 140	225/140	418	200	18	151	209	320	-3	75	300	4.9	1.9
500	127	1,900	236 / 170	270/170	470	224	22	168	235	380	-2	80	441	9.2	2.8
560	204	1,700	275 / 190	305/190	522	250	22	187	261	430	-8	90	635	17.1	3.5
630	309	1,500	325 / 224	355/224	588	280	28	213	294	500	-18	100	944	33.0	5.4
710	450	1,300	360 / 250	400/250	658	315	28	242	329	565	-23	125	1,343	59.5	7.7
800	643	1,150	405 / 280	450/280	738	355	28	267	369	635	-24	130	1,891	105	10
900	915	1,050	475 / 315	510/315	832	400	32	295	416	715	-23	130	2,756	196	13.5
1,000	1,254	950	510 / 355	570/355	932	450	32	322	466	800	-14	130	3,800	336	18
1,120	1,764	850	600 / 400	640/400	1,040	500	40	360	520	900	-5	160	5,462	616	26
1,250	2,450	750	710 / 500	800/500	1,160	560	40	399	580	1,060	0	175	8,045	1,183	36

* The mass and J are the value before hole manufacturing.(GD2=4J) * "B" and "F" same as those of CCM

SVM

※ G1 : the sleeve position for shaft alignment
※ G2 : the sleeve position for checking the gear wear

SVM

Size (out diameter A)	Permissible torque(N·m)	Max. rotating speed(rpm)	Dimension(mm)											Mass (kg)	J (kg·㎡)	Grease (g)
			Shaft diameter			E	ℓ	C	B	F	K	G₁	G₂			Grease (g)
			D1max	D2max	min	E	ℓ	C	B	F	K	G₁	G₂			top	bottom
100	421	1,800	32	22	17	88	35	18	46	67	34	-1	15	3.0	0.003	25	20
112	788	1,800	40	32	17	98	40	18	58	79	40	-4	19	4.2	0.005	35	25
125	1,400	1,800	50	40	22	108	45	18	70	92	43	-4	20	6	0.008	50	40
140	2,010	1,800	56	50	22	134	58	18	80	107	47	3	15	9	0.016	70	60
160	3,080	1,800	65	60	22	170	76	18	95	120	52	12	7	14	0.03	90	80
180	4,730	1,800	75	70	32	190	86	18	105	134	56	15	5	19	0.05	120	100
200	6,750	1,800	85	82	32	210	96	18	120	149	61	18	5	26	0.08	150	120
224	9,810	1,800	100		42	236	108	20	145	174	65	25	1	40	0.16	220	170
250	14,400	1,800	115		42	262	121	20	165	200	74	28	1	57	0.29	370	290
280	22,900	1,800	135		42	294	136	22	190	224	82	28	1	81	0.51	450	360
315	36,100	1,800	160		100	334	156	22	225	260	98	23	11	124	1.03	740	620
355	54,400	1,800	180		125	376	177	22	250	288	108	24	11	174	1.80	900	750
400	76,400	1,800	200		140	416	197	22	285	329	114	39	0	249	3.30	1300	1,000

* The mass and J are the value before hole manufacturing.(GD2=4J)

Download

Catalog-Nara corporation-Gear Coupling

Inquiry

Komachine Inc.

Head Office:

Ace Dongbaek Tower 1-1101, 16-4,

Dongbaekjungang-ro 16beon-gil, Giheung-gu,

Yongin City, Gyeonggido, South Korea 17015

Branch Office:

606, Seoul Stratup Center, 10,

Noryangjin-ro, Dongjak-gu, Seoul, South Korea 06938

CEOCharlie Park

Corporate #535-86-00664