Harness equipment manufacturer, Crimping machine, Processing machine, Cutting machine, Applicator
KM-706 Digital Cutting & Stripping Machine
From AWG 16 to AWG 32. The distance between the rollers and the blades is close enough to process thin & short wires.
Features
- The distance of KM-706’s roller and blades is close enough to process thin & short wires.
- Graphic display for easy set-up
- Push button set-up of all machine functions
- Auto knife sensoring for stripping blades set-up
- Up to 100 recipes for saving of standard set-ups
- Count of pieces needed
- Short mode for wires less than 35mm long
- Single-step cycle
- Cut botton for testing cutting of machine
- Emergency stop button on panel
- Wire run-out and/or tangle detectors
- An air pipe for insulation chip removal during the cycle
- Filter & regulator for pneumatic system
‣ Auto Strip Sensor : Auto knife sensoring for stripping blade set-up. (Patent No. 0285069)
‣ Roller Up&Down Button : With a simple-button press, discharge rollers can be open and close.
‣ Feeding Part
- Six rollers for highly accurate feeding and stripping.
- Discharge rollers open during feed to protect leading wire end.
‣ Cutting Part
- Five line knife system allows the running of five wires at once for high production
- Blade life time is estended maxium five times compare to competitor’s model
- An air pipe removes insulation chip during operation.
Specification
| Wire range | AWG16 ~ AWG32(1.33sq mm ~ 0.031mm) |
| Wire type | AV, UL, AVS, AVSS, KV, KIV, Teflon Wire |
| Cutting length | 18mm ~ 9999.9mm |
| Short mode | less than 18mm |
| Flat cable blades | available |
| Heating Unit | available |
| Pneumatic system | available |
| Cutting length | 0mm ~ 270mm |
| Air consumption | less than 0.1 CFM |
| Power supply | 110/220 VAC, 50/60 Hz, Single Phase |
| Power consumtion | 55 Wat ~ 510 Wat |
| Dimensions(W x D x H) | 485 x 510 x 350 |
| Weight(kg) | 44 |
* Specifications are subject to change without notice.
■ Wire Straightening Unit SOP-713 : straightening wires during feeding
■ Wire Reciever SOP-715 : Collects processed wires less than 800mm or 1600mm long
■ Wire Reciever SOP-716 : Collects processed wires more than 2000mm
■ Wire Twisting Unit SOP-718 : Twists up to three wires at one time
