This product is manufactured by
WOOSUNG VACUUM TECH
Manufacturer information
WOOSUNG VACUUM TECHSF6 gas purification, Liquefaction reclaimer, Helium leakage test, Oil filter, Oil purifier, Vacuum pump, Gauge, Dryer, Chamber
Problem with product info?
Update request
Manufacturer
WOOSUNG VACUUM TECH
Brand
-
SKU
60738
Product Name
Booster Pump
Model Name
WBM-Series
Size
-
Weight
-
Product Details
- WBM SERIES Booster Pump
How it works is that two peanut-shaped ROTORS in a CASING are made to rotate in a same cycle to an opposite direction with each other by a fixed GEAR on SHAFT. Also, the distance between ROTOR and CASING stays to about 0.1~0.6mm, and it is semi-permanent due to no friction even in a high-speed rotation.
- Product Feature
* Interior corrosion is strong due to a strong treatment of the surface
* Safety is maintained in a high-speed rotation by unifying a magnet couple ring on an axis of a motor.
* Control method of atmospheric pressure and non-pressure are inter operable.
* Direction of suction line can use horizontally and vertically.
WBM-1A/3B/6A, WB-1A/3B/6A Technical DATA
INDEX | WBM-1A | WB-1A | WBM-3B | WB-3B | WBM-6A | WB-6A | |
Displacement Speed | (50Hz) | 106 | 250 | 513 | |||
(60Hz) | 127 | 300 | 616 | ||||
Max Inlet Pressure Pa(Torr) | (50Hz) | 1×105(760) | 9.3×103(70) | 1×105(760) | 9.3×103(70) | 1×105(760) | 1.3×103(10) |
(60Hz) | 7.3×103(55) | 7.3×103(55) | 1.1×103(8) | ||||
Max Diff. Pressure Pa(Torr) | (50Hz) | 1×105(760) | 8.0×103(60) | 1×105(760) | 8.0×103(60) | 1×105(760) | 7.3×103(55) |
(60Hz) | 6.7×103(50) | 6.7×103(50) | 6.0×103(45) | ||||
Ultimate Pressure Pa(Torr) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | ||||
Motor Kw(Pole) | 0.4(2P) | 0.75(2P) | 2.2(2P) | ||||
Oil (ℓ) | 0.4 | 0.4 | 1.6 | ||||
Cooling Wate | Flow(ℓ/min) | Air Cooling(공랭) | Air Cooling(공랭) | 3 | |||
Pre.(Mpa) | 0.2 | ||||||
Suction Port Dia. | VG50 | VG65 | VG80 | ||||
Exhaust Port Dia. | VF50 | VF65 | VF80 | ||||
Dimension (L×W×H) | 607.3×219×198 | 762.8×235×236 | 850×359×413 | ||||
Weight (Kg) | 23 | 22 | 36 | 35 | 91 | 86 | |
Backing Pump | 400~1,000ℓ/min | 800~2,000ℓ/min | 1,500~4,000ℓ/min | ||||
WBM-12A/24, WBI-36A, WB-12A/24/36A, Technical DATA (WB-12A & WB-24A 인버터 장착가능)
INDEX | WBM-12A | WB-12A | WBM-24A | WB-24A | WBI-36A | WB-36A | |
Displacement Speed | (50Hz) | 1,137 | 2,330 | 4,130 | 3,441 | ||
(60Hz) | 1,365 | 2,800 | 4,130 | ||||
Max Inlet Pressure Pa(Torr) | (50Hz) | 1×105(760) | 1.3×103(10) | 1×105(760) | 6.7×102(5) | 1×105(760) | |
(60Hz) | 1.1×103(8) | 5.3×102(4) | |||||
Max Diff. Pressure Pa(Torr) | (50Hz) | 1×105(760) | 7.3×103(55) | 1×105(760) | 5.6×103(42) | 1×105(760) | |
(60Hz) | 6.0×103(45) | 4.7×103(35) | |||||
Ultimate Pressure Pa(Torr) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | ||||
Motor Kw(Pole) | 3.75(2P) | 7.5(2P) | 11(2P) | ||||
Oil (ℓ) | 2 | 4.8 | 4.8 | ||||
Cooling Wate | Flow(ℓ/min) | 4 | 5 | 5 | |||
Pre.(Mpa) | 0.2 | 0.2 | 0.2 | ||||
Suction Port Dia. | VG100 | VG200 | VG200 | ||||
Exhaust Port Dia. | VF80 | VF200 | VF200 | ||||
Dimension (L×W×H) | 994×431×414 | 1357×601.5×506 | 1612×615.5×506 | ||||
Weight (Kg) | 130 | 120 | 280 | 260 | 450 | 430 | |
Backing Pump | 3,000~9,000ℓ/min | 5,000~15,000ℓ/min | 8,500~25,000ℓ/min | ||||
- 부스터 펌프 (Mechanical Booster Pumps)
Mechanical Booster Series Technical DATA
INDEX | PMB-001C(M) | PMB-003C(M) | PRC-003A | PRC-006A | PRC-012A | ||
Displacement Speed | (50Hz) | 95(1,580) | 280(4,670) | 500(8,330) | 1,000(16,700) | ||
(60Hz) | 115(1,920) | 330(5,500) | 600(10,000) | 1,200(20,000) | |||
Max Inlet Pressure (Pa) | (50Hz) | 9.3×103 | 1.2×103 | 1.3×103 | |||
(60Hz) | 7.3×103 | 9.3×103 | 1.1×103 | ||||
Max Diff. Pressure (Pa) | (50Hz) | 8.0×103 | 4.0×103 | 8.0×103 | |||
(60Hz) | 6.7×103 | 3.3×103 | 8.0×103 | ||||
Ultimate Pressure (Pa) | 4.0×10-1 | 6.7×10-1 | |||||
Allowable Drive Pressure (Pa) | ~1.0×105 (PRC-A,PMB-CM) | ||||||
Motor (kW) | 0.4 | 0.75 | 2.2 | 3.7 | |||
Oil | ULVOIL R-4 | ||||||
Oil Capacity | 0.35 | 0.7 | 1.5 | 1.9 | |||
Cooling Method | Air | Air & Water | Water | ||||
Primary Side Pressure(MPa) | - | 0.3 | |||||
Inlet/Outlet Difference Pressure (MPa) | - | 0.05 | |||||
Cooling Water Volume(ℓ/min) | - | 2 | 4 | ||||
Cooling Water Temp.(℃) | 5~30 | ||||||
Suction Port Dia. | VG50 | VG80 | VG100 | ||||
Exhaust Port Dia. | VF50 | VF80 | |||||
Dimension W×D×H (mm) | 217×529×180 | 290×656×260 | 296×565×260 | 356×619×320 | 406×759×340 | ||
Weight (kg) | 22 | 46 | 51 | 86 | 118 | ||
INDEX | PMB-024C(M) | PMB-040B | PMB-060B | |
Displacement Speed | (50Hz) | 2,000(33,300) | 3,800(63,300) | 6,200(103,300) |
(60Hz) | 2,400(40,000) | |||
Max Inlet Pressure (Pa) | (50Hz) | 8.0×102 | 1.3×103 (within 5min. at start up) | |
(60Hz) | 6.7×102 | 8.0×102 (during continuous operation) | ||
Max Diff. Pressure (Pa) | (50Hz) | 5.6×103 | - | |
(60Hz) | 4.7×103 | - | ||
Ultimate Pressure (Pa) | 6.7×10-1 | |||
Allowable Drive Pressure (Pa) | ~1.0×105 (PRC-A,PMB-CM) | |||
Motor (kW) | 7.5 | 15 | 18.5 | |
Oil | ULVOIL R-4 | |||
Oil Capacity | 4.5 | 6.5 | ||
Cooling Method | Water | |||
Primary Side Pressure(MPa) | 0.3 | 0.1~0.2 | ||
Inlet/Outlet Difference Pressure (MPa) | 0.05 | |||
Cooling Water Volume( ℓ/min) | 3 | 24 | ||
Cooling Water Temp.(℃) | 5~30 | |||
Suction Port Dia. | VG200 | VG250 | VG300 | |
Exhaust Port Dia. | VF200 | VF150 | VF200 | |
Dimension W×D×H (mm) | 540×1,237×470 | 764×1,230×707 | 764×1,470×707 | |
Weight (kg) | 260 | 950(without motor) | 1,150(without motor) | |
More products
Vacuum System
Helium Leak DetectorHELIOT 700/710 Series
Accessory
Measuring Instrument
Air Dry ProducerAD-Series
Vacuum Evacuation DeviceVE-Series
N2 Booster DeviceNB-Series
Portable Vacuum DevicePE-Series
Oil Purifier & Degassing MachinePD-Series
SF6-Gas Liquefaction SystemSLR-Series
CFC Recovery SystemGR-Series
Vacuum Evacuation DeviceVE-Series
Moisture Measuring SystemMT-Series
Vacuum Leak DetectingLD-Series
Helium Recovery SystemGR-Series
Helium Leak DetectingLD-Series
WOOSUNG VACUUM TECHSF6 gas purification, Liquefaction reclaimer, Helium leakage test, Oil filter, Oil purifier, Vacuum pump, Gauge, Dryer, Chamber
Since its establishment in 1991, Woosung Vacuum Technology Co., Ltd. has upheld the belief that "Preparation belongs to the prepared," demonstrating the unwavering spirit of challenge and pioneering efforts for the advancement of the domestic vacuum industry.
The company has tirelessly conducted research and efforts to contribute to the development of the domestic vacuum industry, with a consistent spirit of challenge and pioneering since its founding. Offering a TOTAL SERVICE ranging from design to production and installation of various vacuum SYSTEMs tailored to diverse customer demands across the industry. These include helium leak detection systems, SF6-GAS liquefaction recovery devices, oil filters, vacuum exhaust devices, and more.
Additionally, in March 2004, the company established an automotive parts business division, taking its first steps into the automotive parts industry.
Presently, the company produces automotive PIPE ASSY and TUBE torch welding parts, precision machined casting parts and has successfully developed and commenced production of heavy machinery industry FLANGES using friction welding. Always prioritizing a "Quality First" approach, the company strives for flawless product quality.
Leveraging accumulated technology and know-how, the company is committed to becoming the company that customers need. Woosung Vacuum Technology Co., Ltd. promises to spare no effort in going wherever customers need us, ensuring the best possible service.