WOOSUNG VACUUM TECH
WOOSUNG VACUUM TECH
Description
- WBM SERIES Booster Pump
How it works is that two peanut-shaped ROTORS in a CASING are made to rotate in a same cycle to an opposite direction with each other by a fixed GEAR on SHAFT. Also, the distance between ROTOR and CASING stays to about 0.1~0.6mm, and it is semi-permanent due to no friction even in a high-speed rotation.
- Product Feature
* Interior corrosion is strong due to a strong treatment of the surface
* Safety is maintained in a high-speed rotation by unifying a magnet couple ring on an axis of a motor.
* Control method of atmospheric pressure and non-pressure are inter operable.
* Direction of suction line can use horizontally and vertically.
WBM-1A/3B/6A, WB-1A/3B/6A Technical DATA
INDEX | WBM-1A | WB-1A | WBM-3B | WB-3B | WBM-6A | WB-6A | |
Displacement Speed | (50Hz) | 106 | 250 | 513 | |||
(60Hz) | 127 | 300 | 616 | ||||
Max Inlet Pressure Pa(Torr) | (50Hz) | 1×105(760) | 9.3×103(70) | 1×105(760) | 9.3×103(70) | 1×105(760) | 1.3×103(10) |
(60Hz) | 7.3×103(55) | 7.3×103(55) | 1.1×103(8) | ||||
Max Diff. Pressure Pa(Torr) | (50Hz) | 1×105(760) | 8.0×103(60) | 1×105(760) | 8.0×103(60) | 1×105(760) | 7.3×103(55) |
(60Hz) | 6.7×103(50) | 6.7×103(50) | 6.0×103(45) | ||||
Ultimate Pressure Pa(Torr) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | ||||
Motor Kw(Pole) | 0.4(2P) | 0.75(2P) | 2.2(2P) | ||||
Oil (ℓ) | 0.4 | 0.4 | 1.6 | ||||
Cooling Wate | Flow(ℓ/min) | Air Cooling(공랭) | Air Cooling(공랭) | 3 | |||
Pre.(Mpa) | 0.2 | ||||||
Suction Port Dia. | VG50 | VG65 | VG80 | ||||
Exhaust Port Dia. | VF50 | VF65 | VF80 | ||||
Dimension (L×W×H) | 607.3×219×198 | 762.8×235×236 | 850×359×413 | ||||
Weight (Kg) | 23 | 22 | 36 | 35 | 91 | 86 | |
Backing Pump | 400~1,000ℓ/min | 800~2,000ℓ/min | 1,500~4,000ℓ/min | ||||
WBM-12A/24, WBI-36A, WB-12A/24/36A, Technical DATA (WB-12A & WB-24A 인버터 장착가능)
INDEX | WBM-12A | WB-12A | WBM-24A | WB-24A | WBI-36A | WB-36A | |
Displacement Speed | (50Hz) | 1,137 | 2,330 | 4,130 | 3,441 | ||
(60Hz) | 1,365 | 2,800 | 4,130 | ||||
Max Inlet Pressure Pa(Torr) | (50Hz) | 1×105(760) | 1.3×103(10) | 1×105(760) | 6.7×102(5) | 1×105(760) | |
(60Hz) | 1.1×103(8) | 5.3×102(4) | |||||
Max Diff. Pressure Pa(Torr) | (50Hz) | 1×105(760) | 7.3×103(55) | 1×105(760) | 5.6×103(42) | 1×105(760) | |
(60Hz) | 6.0×103(45) | 4.7×103(35) | |||||
Ultimate Pressure Pa(Torr) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | 6.75×10-2(5×10-4) | ||||
Motor Kw(Pole) | 3.75(2P) | 7.5(2P) | 11(2P) | ||||
Oil (ℓ) | 2 | 4.8 | 4.8 | ||||
Cooling Wate | Flow(ℓ/min) | 4 | 5 | 5 | |||
Pre.(Mpa) | 0.2 | 0.2 | 0.2 | ||||
Suction Port Dia. | VG100 | VG200 | VG200 | ||||
Exhaust Port Dia. | VF80 | VF200 | VF200 | ||||
Dimension (L×W×H) | 994×431×414 | 1357×601.5×506 | 1612×615.5×506 | ||||
Weight (Kg) | 130 | 120 | 280 | 260 | 450 | 430 | |
Backing Pump | 3,000~9,000ℓ/min | 5,000~15,000ℓ/min | 8,500~25,000ℓ/min | ||||
- 부스터 펌프 (Mechanical Booster Pumps)
Mechanical Booster Series Technical DATA
INDEX | PMB-001C(M) | PMB-003C(M) | PRC-003A | PRC-006A | PRC-012A | ||
Displacement Speed | (50Hz) | 95(1,580) | 280(4,670) | 500(8,330) | 1,000(16,700) | ||
(60Hz) | 115(1,920) | 330(5,500) | 600(10,000) | 1,200(20,000) | |||
Max Inlet Pressure (Pa) | (50Hz) | 9.3×103 | 1.2×103 | 1.3×103 | |||
(60Hz) | 7.3×103 | 9.3×103 | 1.1×103 | ||||
Max Diff. Pressure (Pa) | (50Hz) | 8.0×103 | 4.0×103 | 8.0×103 | |||
(60Hz) | 6.7×103 | 3.3×103 | 8.0×103 | ||||
Ultimate Pressure (Pa) | 4.0×10-1 | 6.7×10-1 | |||||
Allowable Drive Pressure (Pa) | ~1.0×105 (PRC-A,PMB-CM) | ||||||
Motor (kW) | 0.4 | 0.75 | 2.2 | 3.7 | |||
Oil | ULVOIL R-4 | ||||||
Oil Capacity | 0.35 | 0.7 | 1.5 | 1.9 | |||
Cooling Method | Air | Air & Water | Water | ||||
Primary Side Pressure(MPa) | - | 0.3 | |||||
Inlet/Outlet Difference Pressure (MPa) | - | 0.05 | |||||
Cooling Water Volume(ℓ/min) | - | 2 | 4 | ||||
Cooling Water Temp.(℃) | 5~30 | ||||||
Suction Port Dia. | VG50 | VG80 | VG100 | ||||
Exhaust Port Dia. | VF50 | VF80 | |||||
Dimension W×D×H (mm) | 217×529×180 | 290×656×260 | 296×565×260 | 356×619×320 | 406×759×340 | ||
Weight (kg) | 22 | 46 | 51 | 86 | 118 | ||
INDEX | PMB-024C(M) | PMB-040B | PMB-060B | |
Displacement Speed | (50Hz) | 2,000(33,300) | 3,800(63,300) | 6,200(103,300) |
(60Hz) | 2,400(40,000) | |||
Max Inlet Pressure (Pa) | (50Hz) | 8.0×102 | 1.3×103 (within 5min. at start up) | |
(60Hz) | 6.7×102 | 8.0×102 (during continuous operation) | ||
Max Diff. Pressure (Pa) | (50Hz) | 5.6×103 | - | |
(60Hz) | 4.7×103 | - | ||
Ultimate Pressure (Pa) | 6.7×10-1 | |||
Allowable Drive Pressure (Pa) | ~1.0×105 (PRC-A,PMB-CM) | |||
Motor (kW) | 7.5 | 15 | 18.5 | |
Oil | ULVOIL R-4 | |||
Oil Capacity | 4.5 | 6.5 | ||
Cooling Method | Water | |||
Primary Side Pressure(MPa) | 0.3 | 0.1~0.2 | ||
Inlet/Outlet Difference Pressure (MPa) | 0.05 | |||
Cooling Water Volume( ℓ/min) | 3 | 24 | ||
Cooling Water Temp.(℃) | 5~30 | |||
Suction Port Dia. | VG200 | VG250 | VG300 | |
Exhaust Port Dia. | VF200 | VF150 | VF200 | |
Dimension W×D×H (mm) | 540×1,237×470 | 764×1,230×707 | 764×1,470×707 | |
Weight (kg) | 260 | 950(without motor) | 1,150(without motor) | |