Chat with us, powered by LiveChat Turnover Clamp | 매그스위치테크놀로지코리아 - 코머신
제품명 Turnover Clamp
모델명 NVC-LPS
시리즈 Clamps
카탈로그
제품소개

NVC-LPS

WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
30-202556218840471253555519437312.5
50-404557524062521504365822509020.4
0-505557525462621504525822509022.9
80-4045580265725816049870285810231.5
0-5055584278726316050870285810232.5
0-6065586292726516252070285810233.5
30-7075588312726817255670306010439.0
40-8090590330727418056870306010441.1
100-5055584293707018054070305910742.0
5-6065548302707018554770305910743.3
50-90100595355747819061675326811653.3
50-1001105100374758520262875326811657.7
125-7075592316736716755070306812046.5
8-4045595295706217055875367513149.7
8-60655100322726817856875367513156.0


No.ASS’Y NAMENo.PART NAMENo.ASS’Y NAMENo.PART NAME
1BODY--6PAD ASS’Y6-1PAD
2SHACKLE--6-2BOLT & NUT
3SHACKLE PIN--7LEVER ASS’Y7-1SAFETY LEVER
4CAM ASS’Y4-1CAM7-2STOPPER ASS’Y
4-2LINK7-3SPRING PIN
4-3SPRING PIN7-4ROLLER
4-4RIVET PIN7-5SPRING PIN
5CAM BOLT ASS’Y5-1BOLT & NUT8LOCK SPRING--
5-2SPRING PIN


Features

- A special lightweight clamp with a safety factor of 3. The NVC-LPS is convenient and fast to turn over an enlarged plate 
   by butt welding steel plates at shipbuilding plants of shipyards.
- The NVC-LPS has the large pad instead of a jaw in order to minimize the sway of a work piece when turning over it.
- Due to the safety lever, the NVC-LPS is convenient to work with and easy to separate the clamp after lifting thick steel plates.
- After releasing the lever, the link stops functioning even if the shackle is lifted. Therefore, it is easy to do the biting and releasing work.


How to use

- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.


Warnings

- Do not exceed the rated capacity specified on the clamp because the NVC-LPS is lightweight with a safety factor of 3.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- For the turnover clamp, it is safe to use sling chains rather than wire ropes. Use chains of the same length. Ensure that the angle of
  the chain is vertical to the ground.
- When lifting work pieces, a signal man must be outside the rotation radius of a work piece to send a signal to a crane operator


매그스위치테크놀로지코리아의 제품들
매그스위치 자석류 (싱글타입 자석)
매그스위치 자석류 (대용향 리프터용 자석(직렬 배열형 자석))
용접 및 조선소용 치공구
플랜지 위자드
Welding & Shipbuilding Magnetic Tools