This hard water softening device has auto twin valves and two resin tanks and use them in shifts to secure constant supply of softening water and prevent any damage or harm caused by possible interruption of water supply in advance.
- Ideal for the places where operation constantly takes place for 24 hours
- Full automatic softener using micro processor
- Easy to check operation status with lamp display mode
- Automatic switching soft water supply by solenoid valves
- Memory function to remember the passed water amount preparing for any possible power failure.
- Switching from automatic to manual regeneration or vice verse
Light water softening device Increase boiler's life by providing high quality soft water.
- Full automatic operation and regeneration.
- Corrosion and rust-free. No steel plate used.
- Flexible control of regeneration cycles or times.
- Adding salt is not necessary everytime when regenerating.
This hard water softening device has auto twin valves and two resin tanks and use them in shifts to secure constant supply of softening water and prevent any damage or harm caused by possible interruption of water supply in advance.
- Ideal for the places where operation constantly takes place for 24 hours
- Full automatic softener using micro processor
- Easy to check operation status with lamp display mode
- Automatic switching soft water supply by solenoid valves
- Memory function to remember the passed water amount preparing for any possible power failure.
- Switching from automatic to manual regeneration or vice verse
Prominent injection pump is a diagram-type fixed quantity injection pump operated by the motor with extremely short driving distance.
Its diagram is made of steal core and EPDM covered with teflon to resist against chemical drug. As an economic injection pump, it does not need any cooling nor lubricating oil supply.
- Driving distance of diagram is minimized to 2~3mm at most to secure long life of diagram
- For accurate measuring the discharged drug amount and minimizing errors in injection amount, two check balls are installed on the injection entrance and exit
- The injected drug amount can be controlled with a dial when running is stopped. (Control range: 0~100%)
- As a motor-driving type, it does not need any cooling nor lubricating oil supply. Long life. Not affected by voltage change
Flow Sheet
Friction pump
Made of mechanical seal and pump materials strong enough to endure high temperature of 373K{100℃}.
- Small power, High small power,·high pressure, Compact and light.
- Perfect shaft seal, low noise, low vibration, simple repair and inspection.
Stand-type multi-phrase pump
Made of mechanical seal and pump materials strong enough to endure high temperature of 373K{100℃}.
- High quality efficiency, low noise, low vibration.
- Compact and light, In-line, low vibration, simple repair and inspection
Flow Sheet
As a liquid contract type filter, powdered activated carbon is normally used only one time but, our filter adapting Filter-Ag filter media can be regenerated at a set-up time by a controller and its filter life is extended 6 times longer.
- Our Filter-Ag filter media is lower pressure loss than other Filter-Ag filter medium and has a significant capability at removing turbidity.
- Our Filter-Ag filter media is lighter than other Filter-Ag filter medium and has a high dominance rate.
- Low equipment cost with a large treatment amount.
- It can remove up to 20micron of elementary particle.
