KEUMSUNG HIGH TECH
KEUMSUNG HIGH TECH
Description
Structure and Features
As the air put out from the compressor makes wavelengths, the receiver tank should be installed at the location of the output of the air compressor so that the necessary air can be supplied in uniform pressure without wave motion.
- Although the capacity of the tank is decided according to the use of the compressor, the following diagram can be applied to the general cases.
- The standard one is manufactured in vertical type however, horizontal types can be manufactured according to the order.
- As tanks are applied to the laws of industrial Safety and health, the tanks inspected according to the related authorities should be used.
(All the tank models of the company are the ones inspected by thd authorities of Korea Industrial Safety Corporation)
Specification
| Model | Capacity(N3) | A(I · D) | B | C | D | E | F(PCD) | G | H(IN-OUT) | I | |||||||||||||
| KT-0050 | 0.5㎥ | 750 | 880 | 150 | 150 | 370 | 720 | 1444 | 1 1/2" Screw | φ120 | |||||||||||||
| KT-0060 | 0.6㎥ | 750 | 1106 | 150 | 150 | 370 | 720 | 1670 | 1 1/2" Screw | φ120 | |||||||||||||
| KT-0080 | 0.8㎥ | 750 | 1524 | 150 | 150 | 383 | 720 | 2114 | 1 1/2" Screw | φ120 | |||||||||||||
| KT-0100 | 1.0㎥ | 960 | 1054 | 150 | 150 | 427 | 880 | 1733 | 2" Screw | φ120 | |||||||||||||
| KT-0150 | 1.5㎥ | 960 | 1746 | 150 | 150 | 427 | 880 | 2425 | 2", 2 1/2" Screw | φ120 | |||||||||||||
| KT-0200 | 2.0㎥ | 1200 | 1358 | 200 | 200 | 536 | 1130 | 2208 | 3", 4" FLG | 300×400 | |||||||||||||
| KT-0250 | 2.5㎥ | 1300 | 1438 | 200 | 200 | 586 | 1220 | 2362 | 3", 4" FLG | 300×400 | |||||||||||||
| KT-0300 | 3.0㎥ | 1430 | 1390 | 200 | 200 | 586 | 1384 | 2342 | 3", 4" FLG | 300×400 | |||||||||||||
| KT-0400 | 4.0㎥ | 1500 | 1761 | 250 | 250 | 636 | 1390 | 2782 | 4", 5",6" FLG | 300×400 | |||||||||||||
| KT-0500 | 5.0㎥ | 1500 | 2328 | 250 | 250 | 636 | 1400 | 3349 | 4", 5",6" FLG | 300×400 | |||||||||||||
| KT-0600 | 6.0㎥ | 1630 | 2236 | 250 | 250 | 712 | 1500 | 3412 | 4", 5",6" FLG | 300×400 | |||||||||||||
| KT-0700 | 7.0㎥ | 1720 | 2342 | 300 | 300 | 742 | 1618 | 3570 | 5", 6",8" FLG | 300×400 | |||||||||||||
| KT-0800 | 8.0㎥ | 1820 | 2365 | 300 | 300 | 783 | 1620 | 3663 | 5", 6",8" FLG | 300×400 | |||||||||||||
| KT-0900 | 9.0㎥ | 1920 | 2364 | 300 | 350 | 875 | 1753 | 3779 | 5", 6",8" FLG | 300×400 | |||||||||||||
| KT-1000 | 10㎥ | 1925 | 2690 | 350 | 350 | 845 | 1735 | 4076 | 6", 8",10" FLG | 300×400 | |||||||||||||
| KT-1200 | 12㎥ | 1925 | 3377 | 350 | 350 | 845 | 1765 | 3377 | 6", 8",10" FLG | 300×400 | |||||||||||||
| KT-1500 | 15㎥ | 1925 | 4408 | 420 | 450 | 845 | 1735 | 5794 | 8", 10",12" FLG | 300×400 | |||||||||||||
| KT-2000 | 20㎥ | 2365 | 3656 | 450 | 450 | 945 | 2205 | 3746 | 8", 10",12" FLG | 300×400 | |||||||||||||
| KT-3000 | 30㎥ | 2550 | 4915 | 450 | 420 | 1045 | 2230 | 6659 | 10",12" FLG | 300×400 | |||||||||||||
NOTE.
1) The above specifications are our company's standards and the design pressure is 10kgf/cm2.
2) Other models besides the above specification can be manufactured after consulting with the staff of the company.
3) All the products are the ones inspected by KISCO.
4) ASME DESIGN AND STAMP (Option)