Chat with us, powered by LiveChat Control Panel | SAMIL ELTEC - Komachine
Product Name Control Panel
Model SICON-4000DZi
Series Control Panel
Catalog
Product Description

SICON-4000DZi is a leading-edge elevator control panel with hughly enhanced features by using advanced software programming technology and high speed dual DSP. Controller is comprised of inverter and mainboard as a simple unit. 

 It doesn't need to adjust manually slowing down length because of built in PPM calibration.It supports special company code for easy maintenance. 



 

Specification

Power

3-Phase 200v / 380v / 415v / 440v

Frequency

50/60Hz

Nos. of stop

64 Stops

Speed

45~240m/min

Control Type

Rope type (Inverter)

Speed Reduction

Encoder (500~8192Pluse)

Display

Dot Matrix. / LCD

Group

8 Car

Usage

Passenger / Freight

Motor Type

PMSM, IM



Inverter rated current

Kw

Power

5.5Kw

7.5

11Kw

15Kw

22Kw

30Kw

37Kw

45Kw

55Kw

200V

27A

37.3A

49.5A

73A

93A

-

-

-

-

380V

17A

17A

24.7A

34A

47A

64A

78.7A

93.2A

116.2A





Feature

- It can control up to 64 stops (for high raiser) 

- It can control up to 240m/mim (for high speed)
  (Reference site: Menara ING building in Kuala Lumpur Malaysia)

- Excellent Energy -Electric Power saving and Harmonic distortion reduction by applying ReGen Drive System.

- Built in Parameter for 2 Car parallel operation setting
 ㆍUser can set by building’s operating conditions
 ㆍImproved communication speed and stability by use of CAN communication

- It can control “Destination Dispatch Control System”
  (A best suitable lift among the lifts in group operation is dispatched when passenger registers the destination floor at the landing floor)

- Applied high speed dual DSP 32bit
ㆍ Various functions (various monitoring functions, failure detection record functions, etc) 

- It can operate by A/B encoder’s signal only when using PMS Motor
ㆍBuilt-in magnetic detection algorithm for PMS Motor by A/B encoder’s signal
ㆍ Operating by parameter settings without lock-in procedure 

- There are two types operator, so user can choose one
ㆍ Fixing type by supporter on the Main PCB (LCD + 9 keys)(non-detachable)
ㆍUsing OPP-4000 unit (handheld type) 

- Built in PPM Calibration function for Auto deceleration distance calculation
ㆍ It is easy to install at jobsite
ㆍNo need to adjust deceleration distance manually after change parameter

- Built in Safety line grounding detection function 

- Applied Sin / Cos encoder as well as UVW encoder 

Products of SAMIL ELTEC