Chat with us, powered by LiveChat Screw Clamp | MAG SWITCH - Komachine
Product Name Screw Clamp
Model NPC-T, NPC-TB
Series Clamps
Catalog
Product Description

NPC-T, NPC-TB


MODELWLL(TON)Jaw OpeningA1BCD1D2EFØGØHIØJKWeight(kg)
NPC-T1.50-25263016524281513540171928172.8
30-35403419827332016042222030224.7
50-505250264375032218582728402711.5
7.50-455048257405035226553035408014.5
NPC-TB20-40433017924602016740402230493.6

No.ASS’Y NAMENo.PART NAMENo.ASS’Y NAMENo.PART NAME
1BODY--4BEARING ASS’Y4-1BEARING
2SCREW ASS’Y2-1SCREW4-2SPRING PIN
2-2HANDLE5END PLATE--
3SWIVEL--6SNAP RING--



Features

- The NPC-T and NPC-TB are screw clamps used to prevent accidents  caused by the widening, slipping or breakage of the hook because the load  is concentrated at the end of the hook when hanging the hook of a lever  block and a chain block directly on a work piece.

- When using with a lever block, the NPC-T and the NPC-TB are efficient  clamps designed to simultaneously perform the up-and-down straight line  work which is between the eye hole at the upper side and the screw at the  lower side, and the lateral work which is in either way of thele ft and the right.

- The NPC-T and the NPC-TB are safe clamps designed to prevent a work  piece from slipping as the jaw opening of the clamp gets smaller by the  slope which is proportional to the load on the spherical swivel jaw built in  the jig bearing which works as gearing on the opposite side of the screw.



How to use

Insert a steel plate into the inside end of the clamp's jaw opening and then completely tighten the screw.


Warnings

- Do not exceed the rated capacity specified on the clamp.
- Use a work piece only which falls within the jaw opening range specified in the instruction manual.
- If the load is placed laterally, not straightly, on the eye hole, use only 1/2 of the rated capacity.
- Never vertically erect a work piece with this model.
- For horizontal lifting, the clamping point must be two or more. When clamping, the clamps must face each other, not look in one direction.


Products of MAG SWITCH
Magswitch Magnets(Single Type Magnets)
Magswitch Magnets (Lifting Magnets & Heavy Duty Magnet Lifters)
용접 및 조선소용 치공구
플랜지 위자드
Welding & Shipbuilding Magnetic Tools