Chat with us, powered by LiveChat Vertical Clamp | MAG SWITCH - Komachine
Product Name Vertical Clamp
Model NVC-L
Series Clamps
Catalog
Product Description

NVC-L

WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
0.50-2022428102223288265451028563.3
0-50524321662750120378501430546.4
WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
0-50524321662750120378501430546.4
0-50524321662750120378501430546.4
WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
0-50524321662750120378501430546.4
0-50524321662750120378501430546.4
WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
0-50524321662750120378501430546.4
0-50524321662750120378501430546.4
0-50524321662750120378501430546.4
WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
0-50524321662750120378501430546.4
0-50524321662750120378501430546.4
0-50524321662750120378501430546.4
0-50524321662750120378501430546.4
WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)



No.ASS’Y NAMENo.PART NAMENo.ASS’Y NAMENo.PART NAME
1BODY--6JAW ASS’Y6-1SWIVEL JAW
2SHACKLE--6-2BOLT & NUT
3SHACKLE PIN--7LATCH ASS’7-1SAFETY LATCH
4CAM ASS’4-1CAM7-2HANDLE RING
4-2LINK7-3SPRING PIN
4-3SPRING PIN7-4BOLT & NUT
4-4RIVET PIN8LOCK SPRING--
5CAM PIN ASS’5-1CAM PIN
5-2SPRING PIN




Features

- Due to the safety lever, the NVC-L is convenient to use and also easy to separate the clamp after working with thick steel plates.
- After releasing the lever, the link stops functioning even if the shackle is lifted. Therefore, it is easy to do the biting and releasing work.


How to use

- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.


Warnings

- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Ensure that during the operation, the lever does not collide with other objects since the safety lever is attached to the exterior of
  hte clamp.
- Never lift two or more work pieces with one clamp.
- Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper functioning of
  the safety lever.
- When lifting a work piece, a signal man must be outside the rotation radius of a work piece to send a signal to a crane operator.


Products of MAG SWITCH
Magswitch Magnets(Single Type Magnets)
Magswitch Magnets (Lifting Magnets & Heavy Duty Magnet Lifters)
용접 및 조선소용 치공구
플랜지 위자드
Welding & Shipbuilding Magnetic Tools