Chat with us, powered by LiveChat Industrial USB Hub | SystemBase - Komachine
Product Name Industrial USB Hub
Model uGate-400H
Series USB Device
Product Description

– Supports USB 2.0 High-Speed 480Mbps
– Dual Power Supply: Power Jack, Terminal Block
– DIN Rail Mountable
– Supports 12 ~ 48 VDC External Power Supply
– 5V, 500mA Power Supply to each port when External Power Supply is connected
– Supports Industrial Grade Temperature: -40 ~ 85°C
– Built-in 400W Surge Protection in 10/1000µs Peak Pulse
– ESD Protection: ±4KV Contact, ±8KV Air




The uGate-400H is an industrial USB hub supporting USB 2.0 High-Speed 480Mbps. It supports -40 to 85°C operating temperature and equipped with ±8KV ESD level 4 protection circuit to withstand the extreme environment. When an external power supply is connected, each port can provide 500mA power to the USB devices. Wide range of external power can be supplied from 12 to 48 volt. The users can use the adapter or the terminal block to supply power to the system. When one of the power supply is broken, it will get the power from the other source. Therefore, uGate series are suitable and will operate stable in the industrial environment.

Industrial Grade Operating Temperature

The uGate-400H supports operating temperature from -40 to 85°C (by IEC60068-2-33 temperature cycle) and pass the IEC60068-2-30 temperature and humidity environment test. It provides stable operation in tough environment for industrial use.

Surge Protection

Most of the surge, the rapid increase in electrical current or voltage shock, comes from the power cable. When there are weak surge that occurs often, it will deteriorate the components. The strong surge will break the circuit that will be not be recoverable. Most surge occurs by lightening. It can also be generated by an electrical actuator. The main source of the surge occurrences cannot be eliminated therefore some method of protection is required to prevent this problem. uGate series are equipped with built-in surge protection that will withstand and protect the internal or external device from 400W surge in 10/1000 ㎲ peak pulse.

ESD Protection

The ESD (Electrostatic Discharge) occurs by a person or other sources which is cause of the deterioration or destruction of the electronic components. In order to prevent this, uGate series has built-in ESD protection based on IEC 61000-4-2 (ESD Level 4 Protection) to resist electrostatic discharge of ±4KV by contact or ±8KV by air.


SystemBase Industrial USB Hub uGate-400H


SystemBase Industrial USB Hub uGate-400H 1

Products of SystemBase
Serial Card