Chat with us, powered by LiveChat Vertical Clamp (Dismantling Vertical Clamp) | Mag switch - Komachine
Product Name Vertical Clamp (Dismantling Vertical Clamp)
Model NVC-LB
Series Clamps
Catalog
Product Description

NVC-LB


WLL(TON)Jaw OpeningA1A2BCD1D2EFØGIJKWeight(kg)
30-354055819636501283685519437313.0
50-405065622541521424206022458117.4


No.ASS’Y NAMENo.PART NAMENo.ASS’Y NAMENo.PART NAME
1BODY--5CAM BOLT & NUT--
2SHACKLE--6JAW ASS’Y6-1SWIVEL JAW
3SHACKLE PIN--6-2BOLT & NUT
4CAM ASS’Y4-1CAM7LEVER ASS’Y7-1SAFETY LEVER
4-2LINK7-2STOPPER ASS’Y
4-3SPRING PIN7-3BOLT & NUT
4-4RIVET PIN8LOCK SPRING--



Features

- Due to the safety lever, the NVC-LB is convenient to use and also easy to separate the clamp after working with thick steel plates.
  Since the lever is attached to the inside of the clamp, there is a lower possibility of damage by the mid-air collision of clamps.
- Even for a high working place, it is easy to separate the clamp from the ground by connecting a rope to the safety lever.


How to use

- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.
- When pulling the rope to release, pull it lightly with wrist snap.


Warnings

- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Never lift two or more work pieces with one clamp.
- Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper functioning of
  the safety lever.
- When lifting a work piece, a signal man must be outside the roattion radius of a work piece to send a signal to a crane operator



Products of Mag switch
Magswitch Magnets(Single Type Magnets)
Magswitch Magnets (Lifting Magnets & Heavy Duty Magnet Lifters)
용접 및 조선소용 치공구
플랜지 위자드
Welding & Shipbuilding Magnetic Tools