MIXED METAL OXIDE ANODES

Mixed metal oxide anodes have very low consumption rates under 1.0 mg/amp-yr, and can be operated at high current densities in fresh water and in salt water. Because of these impressive performance capabilities, Cathoway sdn.bhd manufactures mixed metal oxide probe anodes for use in heater treaters, condenser water boxes and pressure vessels. The anodes are composed of titanium rods, which are covered with a mixed metal oxide coating. The titanium is inherently resilient and stable, allowing the probe anodes to withstand water turbulence without damage. Because the titanium does not discharge current, electrical current transfer is accomplished through the mixed metal oxide coating. The coating is immune to abrupt current reversals and may be exposed to high current overloads for initial structure polarization without causing harm to the anode.

MMO Tube Anodes

MMO Ribbon Anode

Titanium ASTM 265, coated with IrO2/Ta2O5

Magnesium Anodes

Magnesium has the highest driving potential of any sacrificial anode. Magnesium anodes are used for corrosion protection in most direct earth burial applications and in higher resistivity, aqueous electrolytes.

Cathoway Sdn.Bhd. provides a complete range of anode types, high potential and standard one and different dimensions for your cathodic protection system.

High Potential Mg Anodes

Anodes can be supplied with cables suited 
for the wide range of site conditions

- Kynar / HMWPE
- HMWPE
- XLPE/PVC
- PVC/PVC

The dimensions for the high high silicon iron anodes can be adjusted according to the client requirements.

Test Station

Steel Test Station Data

- Length : 1600mm
- Diameter : 127mm
- wall thickness : 4mm
- Terminals : To suit customer requirement but typically 6 terminals mounted on a non conductive phenolic/PVC board 8mm thick
- Finish : Powder coated paint
- Color : Yellow

Any other requirement can be achieved.