Search

기업찾기(주)삼화KDK
1/1
(주)삼화KDK

(주)삼화KDK

-

모델명

시리즈

열 수축 튜브


구매 안내

아래는 참고용 정보이므로 세부 조건은 반드시 제조사/판매자에게 문의 바랍니다.

결제 방법

제조사/판매자에게 문의 바랍니다.

납기 정보

제조사/판매자에게 문의 바랍니다.

배송 정보

제조사/판매자에게 문의 바랍니다.

원산지

대한민국


02-805-1117

제품 상세 설명

General purpose Environmental friendly Heat Shrinkable Tube especially low toxicity and low evolution of acid gases

1. Application : Free from 6materials such as Cadmium(Cd), Lead(Pb), Mercury(Hg),
Hexavalent Chromium(Cr VI),
PBBs, and PBDEs, which are classified as environmentally hazardous substances.
Cost effrctine choice for many
commercial application with environmental protection. Same application and
typical features toKKHS-A2

2. Applicable specification
UL-224 125℃ 600V VW-1 File no. : E58072(Ref.)
CSA C22.2 NO.198 125℃ 600V File no. : LR103775(Ref.)

3. Operating temperature range : -55℃ to 125℃
Minimum shrink temperature : 90℃

4. Standard color : Black color
PERFORMANCE & SIZE : Same to KKHS-A2
 


Performance

  Preperties   Test Methods Values
Phsical Unaged Tensile strength ASTM D-412 Min. 1.05kgf/㎟
Elongation UL 224 Min. 200%
Aged Tensile strength ASTM D-412
UL 224
158℃/168hrs
Min. 0.8kgf/㎟
Elongation Min. 100%
Heat shock UL-224 Pass @250℃ X 4hrs
Low temperature flexibility ASTM D-2671 No crack @-55℃×4hrs
Secant modulus UL 224 Max. 173MPa
Electrical Dielectric Voltage withstand Unaged UL 224 MIn.2500V/1mm
Aged 158℃/168hrs
Volume resistivity ASTM D 257 MIn. 1×10¹⁴Ω-cm
Chemical Copper corrosion UL 224
158℃/168hrs
No corrison
Copper stability
Elongation
No sign of degradation
Min. 100%
Flammability(VW -1) UL 224 Pass

 

 

General purpose Heat Shrinkable Tube fof Insulation, Protection and Harnessing

1. Ordering information

(1) Color : Black is standard. Other colors are available such as White,Red, Blue, Yellow, Greem,Etc.
(2) Size selection : Order the largest size that will shrink snugly over the component to be covered
(3) Standard packaging : On paper spools
(4) Marking : Marked with ACETUBE UL/CSA etc. Non marked tube is avilable upon request.
(5) Ordering descfiption : Specify product name, size and color

 

Standard Size

SIZE INSIDE DIAMETER WALL THICKNESS LENGTH FORM
As supplied
(Average)
After recovery
(Max.)
As supplied (Nom.) After recovery
(Min.)
1.0mm 1.2mm 0.60mm 0.20mm 0.33mm 200m Round
1.2mm 1.4mm 0.60mm 0.20mm 0.35mm 200m Round
1.5mm 2.0mm 0.75mm 0.20mm 0.35mm 200m Round
2.0mm 2.5mm 1.00mm 0.20mm 0.43mm 100m Round
2.5mm 3.0mm 1.25mm 0.25mm 0.43mm 100m Round
3.0mm 3.4mm 1.50mm 0.25mm 0.43mm 100m Round
3.5mm 3.9mm 1.75mm 0.25mm 0.43mm 100m Round
4.0mm 4.4mm 2.00mm 0.25mm 0.43mm 100m Round
4.5mm 4.9mm 2.25mm 0.25mm 0.56mm 100m Round
5.0mm 5.6mm 2.50mm 0.25mm 0.56mm 100m Round
6.0mm 6.6mm 3.00mm 0.25mm 0.56mm 100m Round
7.0mm 7.6mm 3.50mm 0.25mm 0.56mm 100m Flat
8.0mm 8.6mm 4.00mm 0.25mm 0.56mm 100m Flat
9.0mm 9.8mm 4.50mm 0.25mm 0.56mm 100m Flat
10.0mm 10.6mm 5.00mm 0.25mm 0.56mm 100m Flat
11.0mm 11.6mm 5.50mm 0.25mm 0.56mm 100m Flat
12.0mm 12.6mm 6.00mm 0.25mm 0.56mm 100m Flat
13.0mm 13.7mm 6.50mm 0.30mm 0.69mm 100m Flat
14.0mm 14.4mm 7.00mm 0.30mm 0.69mm 100m Flat
15.0mm 15.6mm 7.50mm 0.30mm 0.69mm 100m Flat
16.0mm 16.7mm 8.00mm 0.30mm 0.69mm 50m Flat
18.0mm 19.3mm 9.00mm 0.35mm 0.76mm 50m Flat
20.0mm 21.7mm 10.0mm 0.40mm 0.76mm 50m Flat
22.0mm 23.4mm 11.0mm 0.40mm 0.76mm 50m Flat
25.0mm 25.5mm 12.5mm 0.40mm 0.86mm 50m Flat
28.0mm 29.0mm 14.0mm 0.45mm 0.86mm 50m Flat
30.0mm 31.0mm 15.0mm 0.50mm 0.86mm 50m Flat
38.0mm 39.0mm 19.0mm 0.50mm 0.97mm 50m Flat
50.0mm 51.0mm 25.0mm 0.20mm 0.97mm 50m Flat
3/64inch 1.4mm 0.60mm 0.20mm 0.35mm 200m Round
1/16inch 2.0mm 0.75mm 0.20mm 0.43mm 200m Round
3/32inch 2.5mm 1.00mm 0.25mm 0.43mm 100m Round
1/8inch 3.4mm 1.50mm 0.25mm 0.43mm 100m Round
3/16inch 4.9mm 2.25mm 0.25mm 0.56mm 100m Round
1/4inch 6.6mm 3.00mm 0.25mm 0.56mm 100m Round
3/8inch 9.8mm 4.50mm 0.25mm 0.56mm 100m Flat
1/2inch 12.5mm 6.00mm 0.25mm 0.56mm 100m Flat
3/4inch 19.3mm 9.00mm 0.35mm 0.76mm 50m Flat
1inch 25.5mm 12.5mm 0.40mm 0.86mm 50m Flat
11/2inch 39.0mm 19.0mm 0.50mm 0.97mm 50m Flat
2inch 51.0mm 25.0mm 0.50mm 0.97mm 50m Flat

 * Additional non-standard sizes available upon request
* Wall thickness will be less if tubing recovery is restricted during shrinkage

문의하기

(주)코머신
대표이사  박은철사업자등록번호  553-86-00664
(우 17015) 경기도 용인시 기흥구 동백중앙로16번길 16-4 에이스 동백타워 1동 1101호

ⓒ2022 Komachine Co. All rights reserved.