Chat with us, powered by LiveChat Horizontal Clamp (Horizontal Clamp for Section Steel) | 매그스위치테크놀로지코리아 - 코머신
제품명 Horizontal Clamp (Horizontal Clamp for Section Steel)
모델명 NGC-H
시리즈 Clamps
카탈로그
제품소개

NGC-H


10-2022428102223288265451028563.3
20-2022428102223288265451028563.3
30-2022428102223288265451028563.3
30-2022428102223288265451028563.3
30-2022428102223288265451028563


No.ASS’Y NAMENo.PART NAMENo.ASS’Y NAMENo.PART NAME
1BODY--5CAM PIN ASS’Y5-1CAM PIN
2SHACKLE ASS’Y2-1SHACKLE5-2SPRING PIN
2-2L-LINK6JAW ASS’Y6-1SWIVEL JAW
2-3RIVET PIN6-2BOLT & NUT
3BODY PIN ASS’Y3-1BODY PIN7LATCH ASS’Y7-1SAFETY LATCH
3-2SPRING PIN7-2HANDLE RING
4CAM ASS’Y4-1CAM7-3SPRING PIN
4-2LINK7-4BOLT & NUT
4-3SPRING PIN8LOCK SPRING--
4-4LINK PIN

Features

- Due to the safety lever, the NVC-L is convenient to use and also easy to separate the clamp after working with thick steel plates.
- After releasing the lever, the link stops functioning even if the shackle is lifted. Therefore, it is easy to do the biting and releasing work.


How to use

- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.


Warnings

- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Ensure that during the operation, the lever does not collide with other objects since the safety lever is attached to the exterior of
   hte clamp.
- Never lift two or more work pieces with one clamp.
- Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper functioning of
   the safety lever.
- When lifting a work piece, a signal man must be outside the rotation radius of a work piece to send a signal to a crane operator.


매그스위치테크놀로지코리아의 제품들
매그스위치 자석류 (싱글타입 자석)
매그스위치 자석류 (대용향 리프터용 자석(직렬 배열형 자석))
용접 및 조선소용 치공구
플랜지 위자드
Welding & Shipbuilding Magnetic Tools