Chat with us, powered by LiveChat Pusher (Ratchet Pusher) | 매그스위치테크놀로지코리아 - 코머신
제품명 Pusher (Ratchet Pusher)
모델명 NPR-C
시리즈 Ratchet and Other Tools


ModelWorking LengthAØBCWeight(kg)


- The NPR-B is a ratchet pusher to push outwards work pieces whose height is low and interval is short.
- The NPR-C is a ratchet pusher used to adjust the interval of frames when attaching side frames to the outer plating and the inner bottom plating of a ship.


- The NPR-B is a special ratchet pusher which has one screw built in the pipe and the other screw in the screw inside the pipe.
- The NPR-B is designed to be lightweight, so it is convenient tobe transported, and also easy to work with in small space.
- For the NPR-C, the two pads, which come in contact with a work piece,  are built in the bearing and the tooth-shaped contact area enables
   the rotation and the tilting(max. 13°) of the pads to be free  and also to prevent slipping, making the NPR-C a safe product.
- The stopper type has the built-in pin to prevent the screw from completely coming out of the pipe.

How to use

After fixing the ratchet pusher between work pieces to be pulled(the NPR-B) and erecting the swivel pad vertically(the NPR-C),  push up or down the pawl according to purposes and then opearte the handle.


- Do not exceed the rated capacity specified on the ratchet puller.
- Be careful that there can be slipping when the inner angle of a work piece to be pushed is not vertical or horizontal
- For non-stopper types, leave at least 40mm of the screw thread inside one end of the pipe(80mm for both ends) when pulling the screw out of a pipe.

매그스위치테크놀로지코리아의 제품들
매그스위치 자석류 (싱글타입 자석)
매그스위치 자석류 (대용향 리프터용 자석(직렬 배열형 자석))
용접 및 조선소용 치공구
플랜지 위자드
Welding & Shipbuilding Magnetic Tools