Search

매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

051-621-9648
기업찾기매그스위치테크놀로지코리아
1/1
매그스위치테크놀로지코리아

매그스위치테크놀로지코리아

Support Clamp (Wrench Type Support Clamp)

모델명

시리즈

Ratchet and Other Tools


구매 안내

아래는 참고용 정보이므로 세부 조건은 반드시 제조사/판매자에게 문의 바랍니다.

결제 방법

제조사/판매자에게 문의 바랍니다.

납기 정보

제조사/판매자에게 문의 바랍니다.

배송 정보

제조사/판매자에게 문의 바랍니다.

원산지

제조사/판매자에게 문의 바랍니다.


051-621-9648

제품 상세 설명

NRC-W

WLL(TON)Working LengthABØCDEFGWeight(kg)
31270-1370-3012701410435035309011.5


Features

- For the NRC-R and -W, the middle part, which works as the support, is designed to be screw style so the length  is adjustable,
  making these clamps convenient to pull or push rfames depending on purposes.
- When erecting a frame on the inner plating vertically(90°), the NRC-R is convenient due to the ratchet style screw functioning.
- For double prevention of clamp slipping, the swivel jaw is insatlled at the opposite side of the screw.
- The U-type ring attached to the clamp is bolt-style so that the repair time can be saved.
- The stopper type has the built-in pin to prevent the screw from completely coming out of the pipe.


How to use

Insert a work piece into the inside end of the jaw opening andth en completely tighten the screw.


Warnings

- Do not exceed the rated capacity specified on the clamp because these models are lightweight with a safety factor of 3.
- Use a work piece only which falls within the working range specified in the instruction manual.
- After completely fixing the block supported by the support clamp, dismantle the clamp.

문의하기