Chat with us, powered by LiveChat Support Clamp (Ratchet Type Support Clamp) | 매그스위치테크놀로지코리아 - 코머신
제품명 Support Clamp (Ratchet Type Support Clamp)
모델명 NRC-R
시리즈 Ratchet and Other Tools


WLL(TON)Working LengthABØCDEFGWeight(kg)


-For the NRC-R and -W, the middle part, which works as the support, is designed to be screw style so the length  is adjustable,
  making these clamps convenient to pull or push rfames depending on purposes.
- When erecting a frame on the inner plating vertically(90°), the NRC-R is convenient due to the ratchet style screw functioning.
- For double prevention of clamp slipping, the swivel jaw is insatlled at the opposite side of the screw.
- The U-type ring attached to the clamp is bolt-style so that the repair time can be saved.
- The stopper type has the built-in pin to prevent the screw from completely coming out of the pipe.

How to use

Insert a work piece into the inside end of the jaw opening andth en completely tighten the screw.


- Do not exceed the rated capacity specified on the clamp because these models are lightweight with a safety factor of 3.
- Use a work piece only which falls within the working range specified in the instruction manual.
- After completely fixing the block supported by the support clamp, dismantle the clamp.

매그스위치테크놀로지코리아의 제품들
매그스위치 자석류 (싱글타입 자석)
매그스위치 자석류 (대용향 리프터용 자석(직렬 배열형 자석))
용접 및 조선소용 치공구
플랜지 위자드
Welding & Shipbuilding Magnetic Tools