This page is built for Korean market only
온라인 전시관대리점 찾기
등록 서비스
기업 등록대리점 등록
광고 서비스수출 서비스헬프센터
KOR

ENG
  • 동화TCA

    Pipes Standars (U.S. Navy)
    모델
    -
    시리즈
    Pipe

    제품 소개

    U.S. Navy Standards

    MATERIAL :

    -NAVINIC 10® CuNi10Fe1Mn MIL - T -16420K alloy 706 (90/10)
      US Navy Specification
    -NAVINIC 30® CuNi30Mn1Fe MIL - T -16420K alloy 715 (70/30)
      US Navy Specification
      TypeⅠ Seamless or TypeⅡ Seam welded Grade 1 or 2
      (without or with heat identification)

    Outside diameter of pipe ØDClass 200Class 700
    Minimum Wall thicknessTheoretical? weightMinimum Wall thicknessTheoretical? weight
    nominal inchactual inchactual mmactual inchactual mmLb / FtKg / mactual inchactual mmLb / FtKg / m
    SEAMLESS
     0.0256.350.0350.890.090.14    
     0.50012.700.200.290.0651.650.340.51
    1/80.54013.720.0651.650.380.560.380.56
    3/80.67517.150.480.720.0721.830.530.79
    1/20.84021.340.610.910.671.00
    3/41.05026.670.781.160.0832.110.981.45
    11.31533.400.991.470.0952.411.412.10
    1 1/41.66042.160.0721.831.392.071.812.69
    1 1/21.90048.271.602.390.1092.772.383.54
    22.37560.320.0832.112.323.450.1203.053.304.91
    2 1/22.87573.032.824.200.1343.404.476.65
    33.50088.900.0952.413.935.850.1654.196.709.97
    3 1/24.000101.604.516.710.1804.578.3712.45
    44.500114.300.1092.775.838.680.2035.1510.6115.78
     5.000127.000.1203.057.1410.6211.8417.62
    55.563141.300.1253.188.2912.340.2205.5914.3221.30
    66.625168.300.1343.4010.5815.750.2596.5820.0829.89
     7.625193.7012.2118.170.2847.2125.3837.76
    88.625219.100.1483.7615.2822.740.3408.6434.3251.07
     9.625244.480.1874.7521.4931.9838.4657.23
    1010.750273.0524.0535.790.3809.6547.9671.37
    1212.750323.900.2506.3538.0556.630.45411.5367.97101.15
    1414.000355.600.1654.1927.7841.350.47312.0177.90115.87
     15.000381.00    0.50312.7788.80132.04
    SEAMLESS or SEAM WELDEDClass 50Class 700
    1616.000406.400.1654.1931.8047.320.53413.56101.00149.58
    SEAMLESS WELDED
    1818.000457.200.1804.1939.0358.10    
    2020.000508.204.5743.4164.62    
    2222.000558.8047.8071.12    
     22.750577.8549.5073.57
    3030.000762.000.2506.3590.54134.77
    4040.0001016.000.3127.92150.70224.19
    Special classes, class 1650, class 3300 and class 6000 well as relevant flanges, butt weld and machined fittings also available upon request.

    생산 제품

    Pipe

    Pipes Standars (European)
    Pipes Standars (Japanese)
    Stainless Steel
    copper and copper alloy tube & pipe
    Pipes Standars (U.S. Navy)
    Pipes Standars (U.S.)

    Bars Division

    imperial sizes
    metric sizes

    Weld Division

    CO2 Accessories (TIP)
    CO2 Accessories (NOZZLE)
    CO2 Accessories (GAS DIFFUSER)
    CO2 Accessories (INSULATOR)

    Butt Weld Fittings

    Elbow (Elbows long radius 16 / 20 BAR)
    Elbow (Elbows 45° Short)
    Reducer (Eccentric 16 BAR/20 BAR)
    Cap
    Tee (Equal tees)
    Tee (Reducing tees (16/20 BAR))
    Elbow (Elbows short radius 10 / 14 BAR)
    Elbow (Elbows long radius 10 / 14 BAR)
    Tee (Reducing tees (10/14 BAR))
    Reducer (Concentric 20 BAR)
    Elbow (Elbows long radius 16 / 20 BAR)
    Reducer (Concentric 16 BAR)
    Tee (Saddles)

    FORGED FTTING

    Cap
    Nipple (Pipe nipple)
    Nipple (Hexagonal nipples)
    UNION/ETC
    Tee (Equal tees)
    Elbow
    Reducer
    Tee (Reducing tees)

    FLANGE ( COMPOSITE TYPE)

    WELD (Outer flanges 300 Lbs)
    WELD NECK (Short inner flanges type EEMUA 20 BAR)
    BLIND FLANGE (Composite blind flanges 300 Lbs)
    WELD NECK (Short inner flanges type EEMUA 16 BAR)
    WELD NECK (Outer flanges 150 Lbs)
    COMPOSITE TYPE
    BLIND FLANGE (Composite blind flanges 150 Lbs)
    SLIP ON

    FLANGE ( SOLID TYPE)

    WELD NECK
    SLIP ON
    BLIND FLANGE
    SOCKET WELD

    Capacity

    copper and copper alloy pipe
    copper and copper alloy fitting
    Steel fitting and flange

    Material

    Stainless Steel
    carbon stee
    copper and copper alloy