This page is built for Korean market only
온라인 전시관대리점 찾기
등록 서비스
기업 등록대리점 등록
광고 서비스수출 서비스헬프센터
KOR

ENG
  • 대화엔지니어링

    Mobrey Side & Vertical Type Magnetic Level Switch
    모델
    MSP100
    시리즈
    Mobrey Side & Vertical Type Magnetic Level Switch

    제품 소개

    General
    One permanent magnet forms part fo a float assembly which rises and falls with changing liquid level.
    A second permanent magnet is positioned within the switch or air pilot valve so that the adjacent poles of the two magnets repel each other through a non-magnetic diaphragm.
    A change of liquid level which moves the float through its permissible travel will cause the float magnet to move and repel the switch magnet to give the snap action operation.
    Switchig is accomplished by the angular movement of the switch magnet being used to operate
     “push-rods”.
    These rods bear on contact blades and break one set of contacts whilst allowing the other set to make. The benefit of this arrangement is that contact force is indepdndent of the magnet.


    Specification
    Electrical models
    Enclosure & wetsside : Aluminium bronze to
                                              BS1400-AB1
                                              max. iron content 2.5%

    End cap Short : e.g. S01DB Aluminium
                                 BS1490-grade LM24

    End cap Long : e.g. S01D6B Brass BS1400-DCB3 Maximum temp : 210℃ except shrouded flost.
                                F93=180℃


    Operation
    The float carries a stainless steel sheathed permanent magnet which rises and falls in the glandless pressure tube with changing liquid level. A switch mechanism is mounted inside the enclosure adjacent to the pressure tube.
    Switching is achieved with the unique Mobrey‘three-magnet’ system, giving snap-action ‘latch-on’ switching.
    The Complete Mobrey horizontal float switch range



    MSP100 Transmitter
    * Non-contact ultrasonic system for measurement of liquid level, tank contents or open channel flow
    * 4-20mA processed output signal proportional to measured value


    Features
     * 2-wire loop powered using standard twisted pair cable
    * Intelligent transmitter with both measurement and digital signal processing in one unit
    * E Exia IIc T4 Zone O approval
    * Digital communications built-in
       - SMART/HART
    * Built-in self diagnostics
    * Remote programming capability
    * Optional PTFE and stainless steel face transmitter


    Typical applications

     * MSP100 is widely used in :
     - Tank contents measurement
     - Inventory control systems
     - Process vessels
     - Open channel flow measurement
    * Multiplexing is possible using the HART digital communication protocol, or the standard 4-20mA signals can be multiplexed.
       Contact our sales office for details.


    Description
    The MSP100 Sonapulse is designed for a wide range of applications fromlevel and contents measurement to flow measurement in open channels where the requirement is a processed 4-20mA output proportional to the measured value.

    With intrinsically safe models for Zone O applications, the MSP100 is ideally suited where performance and safety are required.
    The MSP100 is also a ‘SMART’ transmitter, having all the benefits of measurement functions and digital signal processing in one self- contained unit.

    Additional benefits include remote communications for interrogation, programming and monitoring of field instruments. Changing of operational parameters in order to accommodate different or changing site conditions is easily achieved using the Hand Held Communicator, which can be connected either directly to the MSP100 or at any point in the 2-wire loop, making data access and parameter changes simple and convenient. A CENELEC version of the communicator is available for use in the hazardous area.



    Operation
    Ultrasonic pulses are transmitted from the transmitter face and are reflected from the surface of the product to be received back by the same tranmitter. A measurement of the time delay between the transmitted and received signals enables the microprocessor controlled electronics to calculate the level. From this the microprocessor can deduce conents in any volume units required or the flow of liquid through a flume or over a weir. All the electronics are housed in a tough, weatherproof enclosure.




    생산 제품

    Float type level switch

    Holizontal type
    LS-SM-D1, LS-SM-D3-□
    Swing type
    LS-SM-D1, LS-SM-D3-□

    Diaplacement Type Level Switch

    Diaplacement Type Level Switch
    DM-90□-1F, DM-90□-1F-C, DM-90□-1F-CT, DM-90□-2F, DM-90□-3F, DM-90□-3F-C

    Reed Switch Type Float Level Switch

    Reed Switch Type Float Level Switch
    LS-TM-1F, LS-TM-1FE, LS-TM-2F, LS-TM-2FT-C, LS-TM-3FT, LS-TM-4F, LS-TM-1FS, LS-TM-1FT-S

    Magnetic Float Type Level Transmitter

    Magnetic Float Type Level Transmitter
    DT-100R-TE, DT-100R-IB, DT-100R-T, DT-100R-TC

    Float Operated Type Level Switch

    Float Operated Type Level Switch
    SBS, SBF, SSF, SSFV

    Tubular Type Glass Level Gauge

    Tubular Type Glass Level Gauge
    JISF7212, JISF7211

    Flat & Reflex Type Glass Level Gauge

    Flat & Reflex Type Glass Level Gauge
    DLG-F, DLG-R

    Magnetic Float Type Level Gauge

    Magnetic Float Type Level Gauge
    DMLG-S-□-□, DMLG-T-□-□

    Marine Float Level Gauge

    Marine Float Level Gauge
    DFLG-A(JISF7217A), DFLG-B(JISF7217B), DFLG-C(JISF7217C)

    Self - Powered Content Gauge

    Self - Powered Content Gauge
    DPCG-150-V, DPCG-150-S

    Dial Type Float Level Gauge

    Dial Type Float Level Gauge
    DDLG-S, DDLG-SO, DDLG-T, DDLG-TO

    Capacitance Type Level Switch

    Capacitance Type Level Switch
    DLS-75H, DLS-75W, DLS-75, DLS-75T

    Flow Switch

    Flow Switch

    Non-Flow Alarm Switch

    Non-Flow Alarm Switch

    Hight & Overfill Level Alarm System

    Hight & Overfill Level Alarm System

    Electric & Pneumatic Type Tank Level & Draft Gauging System

    Electric & Pneumatic Type Tank Level & Draft Gauging System

    Bilge Hight Level Alarm System

    Bilge Hight Level Alarm System

    Oil & Water Detector

    Oil & Water Detector

    Electric Pressure Type Level Transmitter

    Electric Pressure Type Level Transmitter

    Liquid Level Control System

    Liquid Level Control System
    SDC-6000, LS-TM

    Mobrey Side & Vertical Type Magnetic Level Switch

    Mobrey Side & Vertical Type Magnetic Level Switch
    MSP100

    Press. Gauge/Thermometer/Temp. Transmitter/Thermocouple

    Press. Gauge
    Thermometer
    Thermocouple
    DH-TMC
    Glass Thermometer
    DH-TM, DH-SM
    Temp. Transmitter
    DH-TMT

    I.S Barrier / Level Indicator

    Level Indicator (WIDE ANGLE TYPE)
    DH-110A
    I.S Barrier
    Z779, KFD2-CR-EX1.30 200
    Level Indicator (RIBBON TYPE)
    TME-100, TME-150