SHINHO SYSTEM
SHINHO SYSTEM
Description
SSP20-R is Designed for DC signal line including 2-wire transmitters.
It absorbs the lightning surges that are transmitted in the DC signal wiring ti insure the line potential will remain at a low voltage to prevent damage to electronic components.
The unit is designed not to fall in the short-circuit condition, thus protecting the equipment from any damage caused by short circuits.
ㆍ2 stage protect construction
ㆍApplied technique : Basis on ANSI / IEEE category "A" / "C"
ㆍSurge suppression Voltage : under 30V (p-p)
Products Detail
| SSP20-R Series | |||||
| APPLICATIONS | 서지 또는 서지로부터 측정 환경 측정 기기 보호 | CERTIFICATE | UL, CE, CSA | PROTECTION FUNCTION | Thermal & Short Circuit Fuse, 2-Stage Surge Protect Noise Filtering (EMI/RFI) |
| APPLIED TECHNIQUE | BASE ON ANSI/IEEE Category “A”/”C | FOR USE | 4~20mA/(DC24V) SIGNAL LINE | MOUNTING | Rail Mounting type(Plug in type) |
| MAIN PROTECT MATERIALS | MOV(Metal-oxide varistor) | ||||
Technical Data
| Mode | SSP20-R Series SIGNAL(DC24V/4~20mA) |
Nominal voltage | 24V/DC |
| Rated voltage | 26V OR 28V OR 30V OR 68~70VDC | Nominal Discharge current(Mode:8*20μsec) | 20KA |
| Max Discharge current(Line:8*20μsec) | 40KA | Response time | 15nsec or less |
| Clamping Voltage Rating | 43V(p-p) | Insulation Resistance | 1000MΩ |
| Capacitance | 1700pF(1MHz | Nominal load current / Rated current | 100mA / 2A (60℃) |
| Voltage protector level Up | 55V | Max, Operating current(Leakage current) | 25μA |
| Temperature range | -40℃ to + 80℃(±5℃) | Ip code | IP20/NEMA12 |
| Dimension(mm) | W23.5xH90xD62(mm) | Case material | ABS |
| Weight | 150g | Mounting | Din Rail Type(Plug in type) |
Komachine Inc.
Head Office:
Ace Dongbaek Tower 1-1101, 16-4,
Dongbaekjungang-ro 16beon-gil, Giheung-gu,
Yongin City, Gyeonggido, South Korea 17015
Branch Office:
606, Seoul Stratup Center, 10,
Noryangjin-ro, Dongjak-gu, Seoul, South Korea 06938
CEOCharlie Park
Corporate #535-86-00664
ⓒ2024 Komachine Inc. All rights reserved.