로드리미트 (Load Limiter) JDL-100 by SG ENGINEERING - Komachine Supplier Profile and Product List

SG ENGINEERING

Home Manufacturers SG ENGINEERING

1/1

SG ENGINEERING

로드리미트 (Load Limiter)

Model

Series

CRANE COMPONENT

Transaction Process

Please contact Komachine.

Payment

Please contact Komachine.

Delivery

Please contact Komachine.

Shipment

Please contact Komachine.

Origin

Please contact Komachine.

Description

LOAD LIMITER is designed to fully protect AC motor against conditions can cause damage.
It can protect the overload mechanical equipment such as Hoist & Crane.
If the motor is overloaded, phase over-current is monitored on the display, alarm goes off and the relay energizes a contactor or breaker to cutoff the power automatically.

Fine setting time and current are available by Microcomputer built-in it
Running current to motor is displayed itself. Thus, setting current is easily done without extra current meter.
It is automatically reset if hoist or crane is descended during the reset time by memorizing ascending time.
Wiring and installing are very simple by using of external current transformer(CT).
In case of being used for creep hoist, the device displays each trip signal and current setting.
The device can be used as the over current relay for protecting AC motor.

Model		JDL-100
Applied Motor	Capacity	Less than 99.9A	250/500A
	Voltage	AC 200V~480V
Current Transformer (CT)		C-25 (130A : 0.13A)	Add the subsidiary CT (ratio 250 : 5) to "C-25" (in case of using the ratio of 500:5 winding 2 turns)
Setting range of Load Current		0.5 ~ 99.9A	5.0 ~ 999A
Adjusting range of start Time		0.1 ~ 10SEC
Adjusting range of Overload Time		0.1 ~ 10SEC
Adjusting range of Reset Time		0.1 ~ 10SEC
Scale of Current Setting		0.1A	0.1A
Power Source		AC 24/48V, 48/110V, 110/220V ±15% 50/60Hz
Capacity of Relay Contect		1a, 1b Contacts, AC250V 5A Resistive load
Aminient Temperature & Humidity		-10 ~ 5°C, less than 80%
Surge Withstand Voltage		AC1500V One minute duration
Power Consumption (Max)		1.0VA (1.5VA)

Inquiry

Komachine Inc.

Head Office:

Ace Dongbaek Tower 1-1101, 16-4,

Dongbaekjungang-ro 16beon-gil, Giheung-gu,

Yongin City, Gyeonggido, South Korea 17015

Branch Office:

606, Seoul Stratup Center, 10,

Noryangjin-ro, Dongjak-gu, Seoul, South Korea 06938

CEOCharlie Park

Corporate #535-86-00664