M&C ENGINEERING
M&C ENGINEERING
Description
ACF6000 Series uses the Coriolis effect as a technique for liquid mass flow measurement. The ACF6000 can measure most of the liquids; the infrared light sensor makes it easy for you to set parameters & change the display data. The Double-C tube & Double-D Tube make it possible for the meter to be used in most liquid applications.
Features
- Can be programmed by infrared light sensor without opening cover
- High turndown ratio of flow rate
- It comes any flanges such as ANSI, DIN, JIS... etc
- Excellent for high pressure application
- Simple for installation, commission and maintenance
- Self-diagnostic capabilities, cable faults, pipe vibration
- High accuracy of +/-0.2% of reading (or +/-0.1% of reading)
- With forward / reverse flow rate measurement function
Specification
| Sensor Type: | Display: |
| C tube (10-40mm) / U tube (50-150mm) | 2 lines LCD with illumination |
| Size: | Flow Rate Unit |
| 10mm ~ 200 mm (3/8" ~ 8") | g/s, Kg/min, kg/Hr, T/Hr, 6 Digit |
| Flow Range: | Density Unit |
| 0 - 1000 Kg/Hr ~ 0 - 1106000 Kg/Hr | Kg/m3, g/cc, 6 Digit |
| Accuracy: | Totalizer Unit |
| +/-0.2% +/-ZS of reading (Standard) | g, Kg, Ton, L, M3, 7 Digits |
| +/-0.1% +/-ZS of reading (Optional) | Temperature |
| Repeatability: | oC, oF, 4 Digits |
| +/-0.03% +/-ZS of reading | Keypad: |
| Density Range: | Infrared light Sensor, |
| 200 - 2300 Kg/M3 (0.2 - 2.3 g/cm3) | can be programmed without |
| Accuracy | Opening the cover |
| +/-0.002 g/cm3 | Turndown Ratio: |
| Temperature Range: | 20 : 1 |
| -40 oC ~ +125 oC (Standard) | Damping: |
| -40 oC ~ +250 oC (Optional, Separate Only) | 0.01 To 1.0 Seconds |
| Material: | Low Flow Cutoff: |
| Wetted Parts | 0.0% ~ 9.0% |
| Stainless Steel 316L | Communication: |
| Flange | RS485 (Modbus Protocol) (Standard) |
| Stainless Steel 316L | Hart Signal (Optional) |
| Sensor Housing | Current Output: |
| Stainless Steel 304 | 4-20 mA (Isolated) |
| Junction Box | Load |
| Aluminum Alloy (Epoxy Paint) | Max. 750 |
| Process Connection: | Output Unit |
| Flange | Mass / Volume / Density / Temperature |
| Flange Type: | Pulse (Alarm) Output: |
| JIS 10K / JIS 20K / JIS 40K | Open Collector |
| ANSI 150# / ANSI 300# / ANSI 600# | Rating |
| DIN PN 10 / PN 16 / PN25 / PN 40 | 3-30Vdc, 50mA Max. |
| Protection Class: | Power Supply: |
| IP 67 | 90-260 VAC, 50/60 Hz or 24 VDC +/-10% |
| Explosion Proof Exde (ib) IIC T6 (Optional) | Power Consumption: |
| Installation: | 30 - 40 W (Depend on sensor size) |
| Compact or Separate | Cable Entry: |
| Signal Cable Length: | Sensor to Converter- 3/4" G |
| 10M - 100M | Signal output / Power supply- M20 |
| Ambient Temperature: | |
| -40 oC to +60 oC | |
| Max. Pressure: | |
| 63 Kg/cm2 |
Komachine Inc.
Head Office:
Ace Dongbaek Tower 1-1101, 16-4,
Dongbaekjungang-ro 16beon-gil, Giheung-gu,
Yongin City, Gyeonggido, South Korea 17015
Branch Office:
606, Seoul Stratup Center, 10,
Noryangjin-ro, Dongjak-gu, Seoul, South Korea 06938
CEOCharlie Park
Corporate #535-86-00664
ⓒ2024 Komachine Inc. All rights reserved.