MAG SWITCH
MAG SWITCH
Description
NPC-UA
| WLL(TON) | Jaw Opening | A1 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.15 | 0-25 | 28 | 18 | 104 | 11 | 30 | 18 | 62 | 22 | 8 | 12 | 22 | 0.4 |
| 0-40 | 43 | 19 | 121 | 11 | 35 | 19 | 67 | 22 | 8 | 12 | 22 | 0.45 |
Features
- A light and convenient clamp which is made of special alloy steel to help workers safely work.
- The NPC-UA is a safe clamp designed to prevent a work piece from slipping because the end part of the body is manufactured to be
diamond-shaped teeth. The end part of the body works as gearing at the opposite side of the screw.
How to use
Insert a work piece into the inside end of the clamp's jaw opening and then completely tighten the screw.
Warnings
- Do not exceed the rated capacity specified on the clamp.
- Use a work piece only which falls within the jaw opening range specified in the instruction manual.
- Do not use other metals with this model except steel.
- Before use, always check the abrasion of the jaw and the screw.
- Do not lift with this model.