Lebe Industrial
Lebe Industrial
Description
WOUND FILTER
Features
- Filtration and resistance to impurities and small particles like dusts.
- Usable under any conditions when manufacturing many kinds of products.
Specifications
|
Material |
Media |
Polypropylene, Glassfiber, Cotton, Acry |
|---|---|---|
|
Core |
Polypropylene, SUS304, SUS316 |
|
|
Filtration capacity |
0.5㎛ to 250㎛ |
|
|
Dimensions |
Inner Diameter |
Φ30 |
|
Outer Diameter |
Φ63 |
|
|
Length |
250, 500, 750, 1000 (mm) |
|
|
10, 20, 30, 40 (inch) |
||
DEATH FILTER
Features
- Accurate Pore Size Pattern allows consistent pore size, which is good for fine transparency and tensile strength and has outstanding impurity elimination and filtration capacity.
- Uniform overlapping of Pattern layers from the surface of a filter to its core forms upside-down triangular shaped pores. This maximizes the filtration capacity by sequential filtration of corpuscles.
Specifications
|
Material |
Media |
Polypropylene, Glassfiber, Cotton, Acry |
|---|---|---|
|
Core |
Polypropylene, SUS304, SUS316 |
|
|
Filtration capacity |
0.5㎛ to 50㎛ |
|
|
Dimensions |
Inner Diameter |
Φ30 |
|
Outer Diameter |
Φ63 |
|
|
Length |
250, 500, 750, 1000 (mm)) |
|
|
10, 20, 30, 40 (inch) |
||
PLEATED FILTER
Features
- Maximized filtration surface area is achieved by corrugated media. It allows for a high efficiency filtration and a low pressure drop.
- Cost-effective, long life due to a low pressure drop and there is no separation of fibres or extraction of impurities.
Specifications
|
Material |
Media |
Polypropylene, Polyester, Microfiber glass, Cellulose |
|---|---|---|
|
Core |
Polypropylene, SUS304, SUS316 |
|
|
Seal |
EPDM, Buna-N, Viton, Silicone |
|
|
Filtration capacity |
0.2㎛ to 50㎛ |
|
|
Dimensions |
Inner Diameter |
Φ30 |
|
Outer Diameter |
Φ65 |
|
|
Length |
250, 500, 750, 1000 (mm) |
|
|
10, 20, 30, 40 (inch) |
||
CARBON FILTER
Features
- Fibres composed of carbon allows for adsorption and filtration removing chlorine, unpleasant smell and taste from waterworks and industrial water.
- Designed to resist external pressure by using Polypropylene Core. Minimized turbidity, elimination of impurities and carbon leak by rolling polypropylene felt outside the core.
- Use of high density fibrous carbon increases the interaction area with activated carbon and adsorption as well as low pressure loss, safe amount of filtration, long lifespan allows for an outstanding elimination ability of organic matters and remaining chlorine.
Specifications
|
Material |
Polypropylene, Polyester |
|
|---|---|---|
|
Type of Activated Cabon |
powder lignite/ granular lignite |
|
|
Dimensions |
Inner Diameter |
Φ30 |
|
Outer Diameter |
Φ64 |
|
|
Length |
250, 500, 750, 1000 (mm) |
|