KM DIGITECH
KM DIGITECH
Description
KM-702N Digital Cutting & Stripping Machine
From AWG 12 to AWG 30, KM-702N cuts and strips a various types and sizes of wires with the Five-Line blades and a pair of discharge rollers.
Quality sensors and operator friendly set-up with graphics are standard. Special blades with guides for flat cables can be provided as an option.
■ Features
- Graphic display for easy set-up
- Push button set-up of all machine functions
- Auto knife sensoring for stripping blades set-up
- Up to 100 recipes for saving of standard set-ups
- Count of pieces needed
- Short mode for wires less than 35mm long
- Single-step cycle
- Cut botton for testing cutting of machine
- Emergency stop button on panel
- Wire run-out and/or tangle detectors
- An air pipe for insulation chip removal during the cycle
- Filter & regulator for pneumatic system
‣ Auto Strip Sensor : Auto knife sensoring for stripping blade set-up. (Patent No. 0285069)
‣ Roller Up&Down Button : With a simple-button press, discharge rollers can be open and close.
‣ Feeding Part :
- Six rollers for accurate feeding and stripping.
- Open & close function during feeding process to protect leading wire ends.
‣ Cutting Part :
- Five line knife system allows the running of five wires at once
- Blade lifecycle is five times longer than one with a single blade
- Air blowing through the pipe to remove insulation chips
| Wire range | AWG 12 ~ AWG 30 (3.33sq mm ~ 0.057mm) |
| Wire Type | AV, UL, AVS, AVSS, KV, KIV, Tellon wire, Glass wire, etc. |
| Cutting length | 35mm ~ 9999.9mm |
| Short mode | less than 35mm long |
| Flat cable blades | available |
| Heating Unit | available |
| Pneumatic system | available |
| Stripping length | Max. 270mm ~ Min. 0mm |
| Air comsumption | less than 0.1 CFM |
| Power supply | 110/220 VAC, 50/60 Hertz, Single Phase |
| Power consumption | Max. 410 Wat ~ Min. 55Wat |
| Dimensions | W485mm D510mm H350mm |
| Weight | 44Kg |
