Search

HITROL

HITROL

HITROL

HITROL

HomeManufacturersHITROL
1/1
HITROL

HITROL

Capacitance Type Level Switch

Model

Series

Level Instrument


Transaction Process

Please contact Komachine.

Payment

Please contact Komachine.

Delivery

Please contact Komachine.

Shipment

Please contact Komachine.

Origin

Please contact Komachine.


Description

Overview

HCC(HPC)-95P Series is a Capacitance Type Level Switch and it detects a level of medium by sensing of capacitance value change caused by dielectric constant of each medium.

 

 

 

Characteristics

- Widely used for various type of medium such as solid, powder and liquid

- Applicable to the medium which has low dielectric constant

- High sensitivity and stability

- Semi-permanent life cycle due to moveless parts

- Easy installation and calibration

- Operating can be checked at the site.

- Available to the tank which has an agitator

- Various sensor types can be applied according to installation condition at the site.

 

 

 

Operation Principle

 

When an air surrounding the electrode probe is replaced by other medium, the capacitance value is changed according to the dielectric constant of the medium. Once the electrode probe is touched by the medium, the capacitance value is increased and the level switch activates relay output by converting of the changed capacitance value to the electronic signal.

 

 

 

Applications

- Liquid

Various fuels, Solvent, Acids, Alkali, Liquefied gas and Pure water, etc

 

- Mixes Liquid

Industrial sewage, Urban sewage, Agricultural chemicals, Various sludge and aqueous solutions, etc

 

- Interface

Oil and water, Mercury in the water, Alcohol and acid, Sediment in liquid, Liquid and foam. etc.

 

- Material

Clay. Sludge, Varnish, Paint. Grease, Adhesive, Paraffin, Cheese and Honey, etc.

 

- Powder

Plastic powder, Rock powder, Carbon, Iron chloride powder, Silt, Sugar and Flour, etc.

 

- Granule

Plastic pellet, Metallic pellet, Chemical fertilizer, Medicine, Grain and Food, etc.

 

- Lump

Coal, Lime stone. Ore and Aggregate, etc.

 
 
 
 
 
Specification
 
 
▶ HCC-95P Series (Weather Proof Version)
 

 
 
 
▶HCC-95P-Ex  / HPC-95P Series (Ex-Proof Version)
 

 
 
 
 
 
Dimension
 

HCC-95P


HCC-95PH


HCC-95PW


HCC-95PWH


HCC-95P-Ex


HCC-95PH-Ex

HCC-95PW-Ex


HCC-95PWH-Ex


HPC-95P


HPC-95PH


HPC-95PW


 

HPC-95PWH


*Actual Product may have a tolerance slightly.
 
 
 
 
 
Installation
 
Below recommendation should be considered when installation.
 
HCC-95P(HPC-95P) Series is generally used for high or low alarm with the installation on the side or top of the tank and can be also applied to metallic or synthetic resin tank because the ground electrode is installed in the level switch and measurement is not affected by tank material.
 
 
 
1. Top Mounting Installation
 
This installation is not much affected by build-up of the medium on the probe but the sensitivity is lower than side mounting because it measures the level by the end of probe only, and it is not suitable to detect a level of the medium which has a low dielectric constant.
 
 
2. Side Mounting Installation
 
Highly sensitive measurement is available because it measures the level by whole of probe but it should be installed slopingly, forwarding of sensor to the bottom in order to avoid a malfunction caused by build-up of the medium on the sensing probe.
 
 
• If the probe length is below than 300mm 
- Min. 250mm distance between sensors
 
• If the probe length is below than 500mm
- Min. 350-400mm distance between sensors
 
 
 
 
 

 
 
 
 
 
 
Wiring
 
- Wiring the AC (90~240V) or DC (24V) according to specification of power supply.
 
- When wring of DC power supply, +,- should be wired correctly.
 
- Wiring should not be carried out when the power is On.
 
- The standard is DPDT and the COM and N.O terminal can be used for High Alarm.
 
- The external ground must be completely connected.

HCC(HPC)-95P Series

 

 

Download

Catalog-HITROL-Level Instrument-Capacitance Type Level Switch-HCC-95P Series

Inquiry

Komachine Inc.
Head Office:
Ace Dongbaek Tower 1-1101, 16-4,
Dongbaekjungang-ro 16beon-gil, Giheung-gu,
Yongin City, Gyeonggido, South Korea 17015
Branch Office:
606, Seoul Stratup Center, 10,
Noryangjin-ro, Dongjak-gu, Seoul, South Korea 06938
CEOCharlie Park
Corporate #535-86-00664

ⓒ2024 Komachine Inc. All rights reserved.