Search

EZMRO

EZMRO

EZMRO

EZMRO

HomeManufacturersEZMRO
1/3
EZMRO

EZMRO

6 Auto Memory Dispenser

Model

Series

Electric Tape Dispenser - Automatic Tape Dispenser


Transaction Process

Please contact Komachine.

Payment

Please contact Komachine.

Delivery

Please contact Komachine.

Shipment

Please contact Komachine.

Origin

Please contact Komachine.


Description

RT-7700
SEQUENTIAL SIX MEMORY AUTOMATIC TAPE DISPENSER

Basic function of RT-7700 is same to RT-7000.
While RT-7000 can set six different pre-set tape length but can cut the specific length at one time, RT-7700 can set six different pre-set tape length in order so can cut tape in six different length at one time. For instance, 3cm, 2 cm, 4 cm, 6 cm, 2 cm, 4 cm order. This will be the best matching if your factory needs different tape length at one procedure.
RT-7700 is very easy in dissembling, doesn’t need a drivel to open the main cover. Very convenient in spare part change and maintenance.

 

 

 

SPECIFICATION

Voltage                          AC100V – AC230V, 50/60Hz, Free Voltage
Power               25W
Size                  W 116 x H 140 x D 213(mm)
Weight              2.5 Kg
Material            ABS
Tape Speed       200mm/second
Tape Width       6-60mm
Tape Length     5-999mm (customized request possible; tape length longer than 999mm)

 

 

 

 

Checking and Replacing The roller

The roller which is damaged or cannot be used any more can be easily exchanged. Refer to the following when the tape is stuck at the outlet or not rolled out smoothly.

■ Turn off the product first.

■ Pull the cutter holder to the front and raise the Cutter unit to remove it from the Main body.

■ Using both hands as shown in the figure, the Front cover and pull as hard as the front, then unlock and lift up to 90° rotation.

Front board enter the Safety switch is activated, the front board and the front cover is opened, the power is automatically turned off

■ In the upper part of the body to remove the front board.

■ Open the guide set by pressing the guide set button.
   - Guide set, opens the front frame of the lock is released.

■ The front frame set is separated from the main body.
  - Up the front frame set to lift the body from the exit.

■ Large roller set, slide it toward the back to remove it from the front frame set.

■ Remove the guide bar from the front frame set.

■ Loosening the screw in the bottom center of the back of the frame in front of the point, you can separate the left and right.
   - Be sure to read not to change the position of the gear decomposition.

■ Remove the sticky material or tape fragments on the roller.

■ If the roller is heavily damaged or wom, replace it to new one.

■ Put some oil to the spinning axes at both ends of the front unit.

■ Install the roller part to the main body.
  - Please check that each part of the combined correctly concluded
  - Locate the auto sensor unit to its initial place.

■ Install the cutter unit.
  - Insert the cutter unit into the main body and press it hard to fix it.
  - Do not forget to test drive before using the product.

 

Inquiry

Komachine Inc.
Head Office:
Ace Dongbaek Tower 1-1101, 16-4,
Dongbaekjungang-ro 16beon-gil, Giheung-gu,
Yongin City, Gyeonggido, South Korea 17015
Branch Office:
606, Seoul Stratup Center, 10,
Noryangjin-ro, Dongjak-gu, Seoul, South Korea 06938
CEOCharlie Park
Corporate #535-86-00664

ⓒ2024 Komachine Inc. All rights reserved.