Easy System
Easy System
Description
Feature
Structure and control suitable for medium / large cargo transportation
Extend operating time: 1 ~ 2 hours
Load carrying capacity expansion: 100kg ~ 2ton
Create on-demand for use and requirements of customers in addition to existing models
Coverage
Medium / Large cargo transportation (mountainous and remote areas)
Forest protection and Large-scale fire suppression
Seawater and Fresh water sampling
Coastal waters management
Advertising and Promotion
Areas that require long-term monitoring and detection
Specifications
| Model | ED60 | ED100 | ED200 | ED400 | |
|---|---|---|---|---|---|
| Engine | Type | 4-Stroke SOHC 2 Cylinder/4 Valves | 4-Stroke SOHC 3 Cylinder - 2 Valves/ Cyl. | 4-Stroke SOHC, 3 Cylinder, 2 Valves/Cyl. | 4-Stroke SOHC 4 Cylinder/16 Valves |
| Displacement | 350 cc (21.4 cubic inches) x 4 | 552 cc (33.7 cubic inches) x 4 | 808 cc (49.3 cubic inches) x 4 | 1,496 cc (91.4 cubic inches) x 4 | |
| Full Throttle RPM Range | 4,500-5,500 RPM | 5,000-6,000 RPM | 5,500-6,000 RPM | 5,500-6,300 RPM | |
| Rated Power | 15 HP x 4 @ 5,000 RPM | 25 HP x 4 @ 5,500 RPM | 50 HP x 4 @ 6,000 RPM | 100 HP x 4 @ 5,900 RPM | |
| Cooling System | Clean Water Cooled | Clean Water Cooled | Clean Water Cooled | Clean Water Cooled | |
| Fuel Delivery | 1 Carburetor | 3 Carburetor | Programmed Fuel Injection | Programmed Fuel Injection | |
| Fuel Tank Capacity | 5L | 15L | 30L | MicroComputer Programmed | |
| Ignition System | PGM-IG | Electric | Electric | Electric | |
| Starting System | Electric/Recoil | Through Hub | Through Hub | Through Hub | |
| Lubrication | Wet Sump | Wet Sump | Wet Sump | Wet Sump | |
| Frame | Materials | Al & Carbon | Al & Carbon | Al & Carbon | Al & Carbon |
| Size | 2.1m x 2.1m x 1.1m | 2.6m x 2.6m x 1.3m | 3.2m x 3.2m x 1.6m | 4.5m x 4.5m x 2.1m | |
| Lifting Capacity | 0.5ton ↑ | 1.0ton ↑ | 1.5ton ↑ | 2.0ton ↑ | |
| Weight | 170kg | 350kg | 520kg | 850kg | |
Drones Engine Base Design
- Engine compartment, control room production and design technology for dedicated engine production(engine mount, control wiring, module, etc.)
- Manufacture and Design of Engine Parts for Drones
Ability to produce optimal performance parts and various peripherals required by consumers
Obtained multi-function diagnosis equipment and instrument development technology that can diagnose dedicated engine
- Co-developed with Professional Control Company
Negotiation of joint development contract with drone control professional organization / company for domestic mass production management in future
- Developed Controller and Electric Device for Drone Engine
Securing technology for development of field control for engine running
Exclusive contract with the engine diagnostic equipment core supplier
Developed cooling system / system development and secured cooling solution technology
Possess Technology
- Core Technology
Change wiring for control convenience
Manufacture of anti-vibration mount
Blade mount production
Structural improvement suitable for unmanned aerial vehicles
Construction of cooling water circulation pump
Cooling water cooler production
Start motor installation production
High temperature / pressure silicone hose application configuration
Realization Plan
Conversion of existing upright engine system optimizes for drones
Identify the fuel optimization area to secure sufficient engine output margin for cruising and acceleration in the engine speed range of 1000 ~ 3000rpm
Set items for responsiveness and time of engine control before proceeding
Integral and interlocking of the engine to change the Harness / Controller and integrate
Preparing a lightweight model by selecting the material for the external structure
Design and additional configuration of water-cooled heat exchanger enables long-term operation time
Mixed frame composition of aluminium and carbon fiber for lightening
Core Configuration
Vibration Suppression Safety of Upright Mounted Engine
Application of ECU control dron system for engine combustion control
Test drive with blade fitment and engine control
Coolant Intertooler, circulation pump manufacture and configuration