SEUNGIL ELECTRONICS
Description
FEATURES
Transmitter device which senses two points of differential pressure and transmits to signal of voltage or current.
Composed of neat LCD screen and 4 buttons for user convenence. Applicable for micro differential pressure sensing, clean room, filter, semiconductor production, experimental equipment.
DIMENSION
SPECIFICATIONS
Power |
DC 24V / AC 24V(50~60Hz) |
|||
Output |
Relay dry contact 2pcs (MAX 250V / 5A) |
Indication (P1,P2) |
||
A/O |
* Voltage : 0~10V * Current : 4~20mA |
* By jumper (1) output (Refer to back terminal block) * Analog output : Control by set point & different Enable output revised |
||
MODBUS RS-485 1pcs |
Surge protection |
|||
Sensor |
-500~500Pa, -5.00~5.00mbar -0.5~0.5kPa, -5.00~5.00hPa -50~50mmAq, -2.00~2.00inchH2O -3.75~3.75mmHg, 0.14~0.14inchHg |
* Dynamic pressure sensor (Positive/Negative pressure) |
||
Input |
UP/DOWN/SETUP/CANCEL 4key |
Inside of front panel cover |
||
Indication |
128x64 COG TYPE GRAPHIC LCD (MONO) |
-20~70℃(Operating Temp) -30~80℃(Storage Temp) |
||
Rated current |
0.3A / DC24V(MAX) |
Waiting power 30~40mA/DC24V |
||
Connection |
ID 4mm Industrial hose or ID 4mm Silicone tube |
Use recommended standard hose |